Effect of Current, Voltage, Temperature, and Time Variations on Thickness of Steel using Electroplating Process

  • Budiana Budiana Politeknik Negeri Batam
  • Choklin Brema Situmorang Politeknik Negeri Batam
  • Hana Mutialif Maulidiah Politeknik Negeri Batam
  • Widya Rika Puspita Politeknik Negeri Batam
Keywords: Current, Electroplating, Temperature, Time, Voltage

Abstract

The use of low carbon steel is categorized as one of the supporting materials in industrial and technological developments because it has high ductility and toughness. However, low carbon steel has limitations in terms of corrosion resistance. There are several ways to increase corrosion resistance in steel. One of them is by providing a layer of protection on the steel surface. The steel plating method used is the electrolysis method or electroplating method. This study aims to determine the influence of variations in current, voltage, temperature, and time on the thickness of the coating formed on steel. The steel plating process is carried out by electroplating process where the coating material or anode is Nickel (Ni) with dimensions (60 mm x 30 mm x 0,1 mm). In comparison, the coated object or cathode is SK5 steel with dimensions (50 mm x 20 mm x 0,3 mm). The aim of this study is to investigate the effect of Current, Voltage, Temperature, and Time Variations on the thickness of steel using electroplating processes. Moreover, all factors will be optimised to achieve the best thickness for steel. Consequently, the corrosion resistance of SK5 can be significantly improved by increasing its thickness. The current variations were used 1A, 2A, 3A, and 4A; voltage variations were used 3V, 6V, 9V, and 12V; temperature variations were used 30°C, 40°C, and 50°C; and times variations were used 0 m, 5 m, 10 m, and 20 m. Based on the results of research that has been carried out on all samples, it is concluded that current, voltage, temperature and time affect the thickness of the sample in the electroplating process. The current, voltage, temperature and time values are linearly related to the thickness resulting from the electroplating process.

Downloads

Download data is not yet available.

References

Baddoo, N. R. "Stainless steel in construction: A review of research, applications, challenges and opportunities." Journal of constructional steel research 64.11 (2008): 1199-1206.

Singh, Mayank Kumar. "Application of steel in automotive industry." International Journal of Emerging Technology and Advanced Engineering 6.7 (2016): 246-253.

Hosford, William F. Fundamentals of engineering plasticity. Cambridge University Press, 2013.

McCafferty, Edward. Introduction to corrosion science. Springer Science & Business Media, 2010.

Jones, Denny A. "Principles and prevention." Corrosion 2 (1996): 168.

Wei, Boxin, and Jin Xu. "Environmental Corrosion of Metals and Its Prevention: An Overview and Introduction to the Special Issue." Coatings 12.7 (2022): 1013.

Haldhar, Rajesh, et al. "Corrosion inhibitors: industrial applications and commercialization." Sustainable corrosion inhibitors II: synthesis, design, and practical applications. American Chemical Society, 2021. 219-235.

Koch, Gerhardus, et al. "International measures of prevention, application, and economics of corrosion technologies study." NACE international 216 (2016): 2-3.

Javaherdashti, Reza. "How corrosion affects industry and life." Anti-corrosion methods and materials 47.1 (2000): 30-34.

Hansson, C. M. "The impact of corrosion on society." Metallurgical and Materials Transactions A 42 (2011): 2952-2962.

Makhlouf, Abdel Salam Hamdy, ed. Handbook of smart coatings for materials protection. No. 64. Elsevier, 2014.

Wiranata, Ardi, and Paryanto Dwi Setyawan. "The Effect of Nickel Electroplating on The Surface Hardness Of Low Carbon Steel." Energy, Materials and Product Design 1.2 (2022): 46-52.

Srinivasan, R., and G. N. K. Ramesh Bapu. "Characterization of nickel deposits from nickel acetate bath." Transactions of the IMF 89.5 (2011): 275-280.

Marikkannu, K. R., et al. "Electroplating of nickel from acetate-based bath–Hull Cell studies." Transactions of the IMF 86.3 (2008): 172-176.

Banerjee, B. C., and U. A. GoswAmi. "The Structure of Electro‐Deposited Nickel." Journal of The Electrochemical Society 106.1 (1959): 20.

Clark, G. L., and S. H. Simonsen. "The relationship between orientation, grain size, and brightness in nickel electrodeposits." Journal of The Electrochemical Society 98.3 (1951): 110.

Wesley, W. A., and J. W. Carey. "The electrodeposition of nickel from nickel chloride solutions." Transactions of The Electrochemical Society 75.1 (1939): 209.

Fanner, D. A., and R. A. F. Hammond. "The properties of nickel electrodeposited from a sulphamate bath." Transactions of the IMF 36.1 (1959): 32-42.

Muthumeenal, N., et al. "Internal stress of electrodeposits of nickel on high strength high carbon steel." Bulletin of Electrochemistry 8.03 (1992): 116-118.

Panikkar, S. K., and TL Rama Char. "Electroplating of Nickel from the Pyrophosphate Bath." Journal of The Electrochemical Society 106.6 (1959): 494.

Published
2023-10-31

Most read articles by the same author(s)

1 2 3 > >>