Study of Lead-Free Solder Joint Reliability

  • Hana Mutialif Maulidiah Politeknik Negeri Batam
  • Budiana Budiana Politeknik Negeri Batam
  • Widya Rika Puspita Politeknik Negeri Batam
  • Adlian Jefiza Politeknik Negeri Batam
  • Mustanir Mustanir Politeknik Negeri Batam
Keywords: lead-free, reliability, solder joint


Solders are essential for the construction of many engineering materials. The use of soldering in electronic packaging has become increasingly critical in today's world. In the electronic manufacturing industry, alternative soldering materials based on tin metal have developed gradually over the last two decades. Manufacturing companies are primarily concerned about removing lead from electronic manufacturing and waste recycling by switching to the lead-free solder. Environmental and human health are adversely affected by exposure to high lead levels in consumer products. The manufacturing industry has switched to lead-free soldering to support their social responsibility initiatives. The three categories of lead-free solder are classified according to temperature range: high-temperature solder, medium-temperature solder, and low-temperature solder. This research is conducted based on the approach of study literature, which is obtained from some papers that generally explain lead-free solder. To provide additional knowledge which is expected to add new insights about the importance of lead-free usage and its behavior.


Download data is not yet available.


Noor EEM, Nasir NFM, Idris SRAJS, Technology SM. A review: lead free solder and its wettability properties. 2016.

Zhang Y, Cai Z, Suhling JC, Lall P, Bozack MJ. The effects of aging temperature on SAC solder joint material behavior and reliability. 2008 58th Electronic Components and Technology Conference: IEEE; 2008. p. 99-112.

Berthou M, Retailleau P, Frémont H, Guédon-Gracia A, Jéphos-Davennel CJMR. Microstructure evolution observation for SAC solder joint: Comparison between thermal cycling and thermal storage. 2009; 49:1267-72.

Chowdhury MR, Ahmed S, Fahim A, Suhling JC, Lall P. Mechanical characterization of doped SAC solder materials at high temperature. 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm): IEEE; 2016. p. 1202-8.

Arfaei B, Mahin-Shirazi S, Joshi S, Anselm M, Borgesen P, Cotts E, et al. Reliability and failure mechanism of solder joints in thermal cycling tests. 2013 IEEE 63rd Electronic Components and Technology Conference: IEEE; 2013. p. 976-85.

Kobayashi T, Kobayashi K, Mitsui K, Shohji IJAiMS, Engineering. Comparison of Sn-5Sb and Sn-10Sb alloys in tensile and fatigue properties using miniature size specimens. 2018;2018.

Pan J, Wang J, Shaddock DMJJom, packaging e. Lead-free solder joint reliability–State of the art and perspectives. 2005; 2:72-83.

Puttlitz KJ, Stalter KA. Handbook of lead-free solder technology for microelectronic assemblies: CRC Press; 2004.

Ikeda Y, Iizuka Y, Asai T, Goto T, Takahashi Y. A study on the reliability of the chip surface solder joint. 2008 20th International Symposium on Power Semiconductor Devices and IC's: IEEE; 2008. p. 189-92.


Most read articles by the same author(s)

1 2 3 4 > >>