STUDI PERBANDINGAN CUT QUALITY PADA VARIASI CUTTING SPEED DALAM PLASMA CUTTING
DOI:
https://doi.org/10.30871/jatra.v7i1.9317Kata Kunci:
Plasma Cutting, Cutting Speed, Cut Quality, Mild SteelAbstrak
Dalam fabrikasi logam, plasma cutting sangat penting karena menawarkan hasil potongan yang presisi, efisien dan fleksibel. Salah satu parameter kritis dalam plasma cutting yaitu cutting speed. Tujuan penelitian ini yaitu membandingkan kualitas hasil potong (cut quality) pada material mild steel dengan ketebalan 8 mm. Variasi cutting speed yang diteliti yaitu 3000 mm/min, 4000 mm/min, 5000 mm/min, dan 6000 mm/min. Pengamatan cut quality dilakukan secara visual dan pengukuran kedalaman hasil potongan menggunakan vernier caliper. Hasil pengamatan menunjukkan bahwa pada parameter cutting speed 3000 mm/min menghasilkan cut quality terbaik. Pada variasi cutting speed yang rendah menghasilkan cut quality yang baik karena plasma memiliki waktu yang cukup untuk penetrasi dan memotong material dengan bersih.
Unduhan
Referensi
[1] M. Kolarikova, L. Kolařík, T. Panáček, J. Králíček, M. Kučera and T. Gurčík, "Influence of Cutting Parameters and Plasma Cutting Mode on Cutting Quality and Process Noise," MANUFACTURING TECHNOLOGY, vol. Vol. 20 No. 6, no. December 2020, pp. 771-776, 2020.
[2] V. A. Nemchinsky and W. S. Severance, "What we know and what we do not know about plasma arc cutting," J. Phys. D: Appl. Phys, no. 39, pp. 423-438, 2006.
[3] K. Patel and D. P. Agarwal, "Effect of process parameters on cut quality of stainless steel of plasma arc cutting using hybrid approach.," International Journal of Metal Removal Rate of Structural Steel, vol. 4, no. 5, pp. 418-426, 2017.
[4] L. Kudrna, J. Fries and M. Merta, "Influences on plasma cutting quality on CNC machine," Multidiciplinary Aspects of Production Engineering, vol. 2(1), pp. 108- 117, 2019.
[5] J. Kechagias, M. Petousis, N. Vidakis and N. Mastorakis, "Plasma Arc Cutting Dimensional Accuracy Optimization," in ITM Web of Conference 9, 03004 , 2017.
[6] S. Ilii, M. Coteata and A. Munteanu, "Experimental results concerning the variations of surface roughness parameter (ra) at plasma arc cutting of a stainless steel workpiece," International Journal of Modern Manufacturing Technologies, vol. II, no. 1, pp. 31-36, 2010.
[7] M. R. D. S. M. A. A. Gostimirović, "An experimental analysis of cutting quality in plasma arc machining," Advanced Technologies & Materials, vol. 45, no. 1, pp. 18-23, 2020.
[8] S. Masoudi, M. Mirabdolahi, M. Dayyani, F. Jafarian, A. Vafadar and M. R. Dorali, "Develop an intelligent model to optimise heat-affected zones, kerfs, and roughness in 309 stainless steel plasma cutting by using experimental results," Materials and manufacturing processes, vol. 34, no. 3, pp. 345-356, 2019.
[9] R. Bini, B. M. Colosimo, A. E. Kutlu and M. Monno, "Experimental study of the features of the kerf generated by a 200 A high tolerance plasma arc cutting system," Journal of Materials Processing Technology, vol. 196, no. (1-3), pp. 345- 355, 2008.
[10] C. Ozek, U. Caydas and E. Unal, "A fuzzy model for predicting surface roughness in plasma arc cutting of AISI 4140 steel," Mater Manuf Process, vol. 27, pp. 95-102, 2012.
[11] S. Bhowmick, J. Basu, G. Majumdar and A. Bandyopadhyay, "Experimental study of plasma arc cutting of AISI 304 stainless steel," Mater Today Proc, vol. 5, pp. 4541- 4550, 2018.
[12] S. S. Pawar and K. H. Inamdar, "Factors affecting quality of plasma arc cutting process: A review.," International Journal of Advanced Engineering and Technology Science, pp. 4-12, 2016.
[13] M. Gostimirović, D. Rodić, M. Sekulić and A. Aleksić, "An experimental analysis of cutting quality in plasma arc machining,"
Advanced Technologies & Materials, vol. 45, no. 1, pp. 1-8, 2020.
[14] S. B. J. M. G. &. B. A. Bhowmick, "Experimental study of plasma arc cutting of AISI 304 stainless steel and mild steel," Materials Today: Proceedings, vol. 5, no. 2, pp. 4541-4550, 2018.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
11.jpg){kind=logo}
