Integration System of CAD/CAM In Machinary Process Using Wire-EDM

  • Domi Kamsyah Mechanical Engineering Department, Politeknik Negeri Batam
  • Ari Kurniadi Mechanical Engineering Department, Politeknik Negeri Batam
  • Benny Haddli Irawan Mechanical Engineering Department, Politeknik Negeri Batam
  • Rahman Hakim Mechanical Engineering Department, Politeknik Negeri Batam https://orcid.org/0000-0002-1105-6902
  • Saiful Arif Mechanical Engineering Department, Politeknik Negeri Malang
Keywords: EDM Wire Cutting, CAD, CAM, CNC

Abstract

Computer-Aided Design (CAD) and Computer-Aided Manufacturing (CAM) are usually used to draw sketches and model manufacturing work processes on machines that operate using computer numerical control (CNC). To communicate with each other CAD and CAM must have the same format, the drawings produced by CAD must the same format to be run on the CAM. In this study, product images will be created using Autocad software and it will run on the Fikus VisualCAM 19 software to visualize the tool pathway. The program is created to run a CNC machine and the resulting product will check the conformity of its dimensions and geometry. The results obtained are that the images generated from the AutoCAD software can run well on the Fikus VisualCAM 19 software. The program in the form of NC code generated by AutoCAD and Fikus VisualCAM19 software can be run properly by a CNC wire-cutting EDM machine, this can be seen from the product results that match the dimensions and geometry.

Downloads

Download data is not yet available.

References

A. Pratama and R. I. Media, “A rule-based approach with multi-level feature taxonomy for recognition of machining features from 3D solid models,” J. Phys. Conf. Ser., vol. 1450, no. 1, 2020.

B. H. Irawan, F. P. Ryadi, and W. Rosbandrio, “Pengaruh Weld Time Terhadap Kecacatan Produk Pada Proses Pengelasan Material Termoplastik ABS (Akrilonitril Butadiena Stiren) Menggunakan Mesin Ultrasonic Welding,” J. Teknol. dan Ris. Terap., vol. 2, no. 2, pp. 57–63, 2020.

R. Hakim, H. Widiastuti, I. Wijayanti, Mufti Fathonah Muvariz, and A. K. Silaban, “Project-Based Learning for The Design of Progressive Dies Supporting Tools,” Rekayasa Mesin, vol. 12, no. 1, pp. 117–124, 2021.

I. Saputra, R. Hakim, C. B. Nugroho, Ridwansyah, and A. Prasetyo, “Roundness Error Investigation Based on Least Square Circle Method,” in The 8th Applied Business And Engineering Conference 2020, 2020, pp. 85–92.

B. H. Irawan and N. Rusmana, “Optimisasi Proses Pemesinan Cnc Milling 3 Axis Dengan Menggunakan Metode Taguchi,” in Seminar Teknologi Manufaktur 2014, 2014, pp. 1–6.

Widodo and Suhardjono, “Effect of speed ratio and grit size on vibration and surface roughness in surface grinding process of OCr12VM material,” AIP Conf. Proc., vol. 2088, no. March, 2019.

I. Wijayanti, R. Hakim, and Widodo, “Studi Experimen Mula: Analisa Kekasaran Permukaan Baja ST 37 Terhadap Variasi Kuat Arus Listrik,” J. Teknol. dan Ris. Terap., vol. 1, no. 2, pp. 61–65, 2019.

V. Thangarasu, G. Devaraj, and R. Sivasubramanian, “High speed CNC machining of AISI 304 stainless steel; Optimization of process parameters by MOGA,” Int. J. Eng. Sci. Technol., vol. 4, no. 3, pp. 66–77, 2013.

A. Amrullah and R. Hakim, “the Effect of the Pulse Current in Wire Electric Discharge Machine on Measurement Error Toward Aluminum Alloy: an Experimental Study,” J. Integr., vol. 12, no. 2, pp. 112–115, 2020.

W. Radzimirski, “Analysis of the possibilities of using WEDM technology in the production of a paper punch,” Doctoral dissertation, Instytut Technik Wytwarzania, 2019.

K. Hanson, Machining for dummies, Hoboken: John Wiley & son, Inc, 2018.

M. P. Groover and E. W. Zimmers, CAD/CAM: Compter-Aided Design and Manufacturing, Upper Saddle River: Prentice-Hall, Inc., 1984.

E. Oberg, F. D. Jones, H. L. Horton and H. H. Ryffel, 27th Edition Machinery's Handbook, New York: Industrial Press, Inc., 2004.

M. Gavril , M. Andrei and T. Lucian, "Increase Productivity and Const Optimazation in CNC Manufacturing," in 20th Innovative Manufacturing Engineering and Energy Conference (IManEE 2016), 2016.

E. E. Susanto, A. Subardi and D. Setiawan, "Optimalisasi Kualitas Pemotongan Sudut Pada Mesin Wire Cutting Electric Discharge Machining (EDM)," in Seminar Nasional Inovasi dan Aplikasi Teknologi di Industri, 2016.

A. Umare, S. Parchand and P. Shingare, "Wire Cut EDM Proses - a Review," International Journal of Advance Research and Innovative Ideas in Education, pp. 394-398, 2017.

K. Ishfaq and N. Ahmed, "Evaluating Material’s Interaction in Wire Electrical Discharge Machining of Stainless Steel (304) for Simultaneous Optimization of Conflicting Responses," MDPI, 2019.

R. N. Siburian, Pengaruh Parameter Pemotongan Wire Cut Elektrical Dischatge Mechine Terhadap Kekerasan dan Kekerasan Permukaan Hasil Potong Baj XW-5, Medan: Universitas Medan Area, 2020.

vectorizer.io, "vectorizer," Paddle.Com Market Limited, [Online]. Available: https://www.vectorizer.io/. [Accessed 26 Juni 2021].

Published
2021-06-30
How to Cite
Kamsyah, D., Kurniadi, A., Irawan, B., Hakim, R., & Arif, S. (2021). Integration System of CAD/CAM In Machinary Process Using Wire-EDM. Jurnal Teknologi Dan Riset Terapan (JATRA), 3(1), 21-26. Retrieved from https://jurnal.polibatam.ac.id/index.php/JATRA/article/view/3050