Comparative Analysis between SA-516 Gr 70 Material with SA-537 Class 2 Material in Shell Pressure Vessel Fabrication Process
DOI:
https://doi.org/10.30871/ji.v16i2.8563Kata Kunci:
Bejana Tekan, ASME VIII DIV 1, Shell, suhu, tekananAbstrak
Bejana tekan adalah wadah yang dirancang untuk menampung cairan bertekanan, termasuk cairan dan gas dengan tekanan dan suhu yang bervariasi. Tekanan yang diberikan pada dinding dan badan bejana merupakan faktor penting yang harus dipertimbangkan secara cermat untuk memastikan kepatuhan terhadap standar desain internasional yang berlaku dan memprioritaskan keselamatan dan keamanan pekerja. Penelitian ini difokuskan pada bejana tekan untuk menyelidiki dampak suhu terhadap ketebalan cangkang agar memenuhi standar ASME. Penelitian ini menggunakan komponen cangkang yang terbuat dari bahan SA-516 Gr 70 dan SA-537. Eksperimen dilakukan dengan setiap bahan pada suhu 250°C, 235°C, dan 343°C, yang menunjukkan bahwa ketebalan bervariasi berdasarkan bahan dan suhu. Temuan penelitian menunjukkan kepatuhan terhadap standar ASME, karena ketebalan cangkang di semua uji coba melebihi minimum yang ditentukan dalam gambar.
Unduhan
Referensi
American Society of Mechanical Engineers, ASME Boiler and Pressure Vessel Code, New York, NY, USA: ASME, 2021.
A. McGowan, "Pressure vessel design: A guide to safe and cost-effective design," J. Pressure Vessel Technol., vol. 140, no. 3, pp. 031701, 2018.
J. R. Smith, "Types of pressure vessels: Design considerations," Chem. Eng. J., vol. 320, pp. 121-135, 2017.
S. J. Hwang and J. Y. Choi, "Heat exchangers: Theory and applications," Heat Transfer Eng., vol. 40, no. 8, pp. 637-650, 2019.
L. M. Jones, "Material selection for pressure vessels," Mater. Sci. Eng., vol. 642, pp. 29-37, 2016.
T. H. Lee, "Design and analysis of pressure vessel heads," Int. J. Pressure Vessels Piping, vol. 183, pp. 104-112, 2020.
ASTM International, "Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service," ASTM A516/A516M, 2020.
Y. Zhang and H. Wu, "Mechanical properties of SA-516 and SA-537 steel plates," J. Mater. Eng. Perform., vol. 30, no. 2, pp. 156-165, 2021.
R. Gupta and P. Sharma, "Advanced materials for pressure vessel applications," Mater. Today: Proc., vol. 5, no. 1, pp. 2340-2344, 2018.
F. Chen, "Corrosion resistance of carbon steel in aggressive environments," Corros. Sci., vol. 150, pp. 103-112, 2019.
K. Robinson, "Comparative study of pressure vessel materials: SA-516 vs SA-537," Mater. Res. Express, vol. 9, no. 3, pp. 035005, 2022.
K. Wong and K. Yeo, "Protective coatings for carbon steel in industrial applications," Surf. Coat. Technol., vol. 387, p. 125573, 2020.
M. Fernandez, "Failure analysis in pressure vessels: Importance of material properties," Eng. Fail. Anal., vol. 100, pp. 19-27, 2019.
S. Patel, "Innovations in pressure vessel technology," J. Pressure Vessel Technol., vol. 143, no. 4, pp. 041201, 2021.
A. Smith, "Material properties of SA-516 Grade 70N," J. Mater. Sci. Eng., vol. 78, pp. 45-53, 2020.
B. Johnson, "Advancements in ultrasonic thickness measurement technology," NDT Tech. J., vol. 22, no. 4, pp. 233-240, 2021.
C. Lee, "Corrosion monitoring techniques in pressure vessels," Corros. Eng. Sci. Technol., vol. 56, no. 2, pp. 85-90, 2020.
D. Clark, "Improving pressure vessel design with material performance data," Int. J. Pressure Vessels Piping, vol. 190, pp. 57-66, 2022.
E. Kim and F. T. Nguyen, "Comparative analysis of alternative materials for pressure vessels," J. Mater. Sci., vol. 55, no. 12, pp. 5001-5010, 2023.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2024 JURNAL INTEGRASI
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
