ALAT KENDALI KECEPATAN MOTOR PADA PENGGERAK DEPAN SEPEDA LISTRIK DI POLITEKNIK NEGERI BATAM
Abstract
Brushless DC motor is applied in many field of industries, one of which transportation sector. The operation of BLDC motor need a speed control system as commutation process since it does not applied any brush. This research using an Arduino nano as its microcontroller to regulate the switching driver mosfet with IR2103 type. This mosfet driver is used to trigger mosfet switching at iverter 3 phase circuit so that power from battery can flow to BLDC motor. Mosfet type is STP75NF75 with Vds 75 Volt and Ids 80 Amps, while type of motor used is BLDC 350 watt and 36 Volt. The BLDC motor has Hall Effect sensor as rotor positioning detection. As for the commutation process, PWM is used as pulse modulation which is represented the motor speed and frequency of PIN default of Arduino. Speed earned is 224-340 rpm with power consumption of 20-21 Watts.
Downloads
References
Badan Pusat Statistik. Internet: https://www.bps.go.id/dynamictable/2016/01/28/1125/produksi-bahan-bakar-minyak-bbm-1996-2015.html [14 Feb 2019].
International Energy Agency. Internet: https://www.iea.org/publications/freepublications/pu
blication/statistics_manual_indonesian.pdf [14 Feb 2019].
Agung Dwi Yulianta, Sasongko Pramono Hadi, Suharyanto, “Pengendalian Kecepatan Motor Brushless DC (BLDC) menggunakan Metode Logika Fuzzy”, Jurnal Sains, Teknologi dan Industri, Vol. 12, No. 2, Juni 2015, pp.248 – 254.
Fauzan Rahman, “PENINGKATAN KINERJA PENGEREMAN MOTOR BLDC PADA SEPEDA LISTRIK BERBASIS LOGIKA FUZZY”. Internet: http://ejurnal.bunghatta.ac.id/index.php?journal=JFTI&page=article&op=view&path%5B%5D=10352&path%5B%5D=8648, 2017 [10 Februari 2019].
Nanang Masudi. “DESAIN CONTROLLER MOTOR BLDC UNTUK MENINGKATKAN PERFORMA (DAYA OUTPUT) SEPEDA MOTOR LISTRIK”. Institut Teknologi Sepuluh Nopember, Surabaya, 2014.
Benhur Nainggolan, Fadhilla Inaswara, Gilang Pratiwi dan Hirzan Ramadhan. “RANCANG BANGUN SEPEDA LISTRIK MENGGUNAKAN PANEL SURYA SEBAGAI PENGISI BATERAI”. POLITEKNOLOGI VOL. 15 No. 3 SEPTEMBER 2016, pp.263-272.