ANALISA MOMEN PUNTIR POROS IMPELLER PADA SISTEM PROPULSI WATERJET KAPAL 6 METER DENGAN VARIASI BLADE IMPELLER MENGGUNAKAN METODE CFD
DOI:
https://doi.org/10.30871/jatra.v7i2.9968Keywords:
Torsional Moment, Impeller Blade, Shaft, Alloy Steel 4340Abstract
Analysis of the impeller shaft torsion moment in the waterjet system with impeller blade variations aims to analyze the strength of the impeller shaft caused by the specified engine power. The engine used has a power of 6.5 hp and has an output power of 2000 Rpm. This study aims to determine the impeller shaft torsion moment with impeller blade variations using the Computational Fluid Dynamic (CFD) method. Using Aloy steel 4340 material which has a shaft diameter of 23 mm and a length of 700 mm. The torque value that appears in variation 1 with 3 impeller blades is 30.65 Nm, variation 2 with 4 impeller blades is 87.61 Nm and for variation 3 with 5 impeller blades is 33.07 Nm. In accordance with the results of the calculation of the torsion moment of 30.85 Nm, it is known that variation 1 with 3 impeller blades is said to meet the specified criteria to be applied to the waterjet system. Based on the results of the specified allowable stress of 60.89 Nm, it was found that for variations 1 and 3 with the number of impeller blades of 3 and 5 respectively, they have met the safe conditions for the impeller shaft torsion moment, by considering that variation 3 is adjusted to the results of the impeller shaft torsion moment calculation to determine the effectiveness for the specified waterjet system.
Downloads
References
[1] S. Jatmiko and S. Jokosisworo, “ANALISA KEKUATAN PUNTIR DAN KEKUATAN LENTUR PUTAR POROS BAJA ST 60 SEBAGAI APLIKASI PERANCANGAN BAHAN POROS BALING-BALING KAPAL”.
[2] A. Alfendry and U. Budiarto, “Analisa Penerapan Diesel Waterjet Propulsion (DWP) Dan Electrical Waterjet Propulsion (EWP) Ditinjau Dari Konsumsi BBM Pada Kapal Patroli Imigrasi 14 Meter”.
[3] I. Siregar and S. Lubis, “ANALISA PENGARUH SUDUT SUDU IMPELLER PADA UNJUK KERJA BLOWER SENTRIFUGAL,” 2020.
[4] G. Ranggatama, “Analisis Perancangan Pompa Sentrifugal pada Perancangan Shower Tester Booth di PT X,” J. Tek. Mesin, vol. 9, no. 1, p. 88, Oct. 2020, doi: 10.22441/jtm.v9i2.4921.
[5] H. Hasdiansah, M. Stevanus Seva, M. Oktavianto, W. Ahadiatullah, Muhammad Ahlan Maulidiansyah, and T. Viniolita, “Analisis Variasi Type Blade Impeller Produk 3d Printing Dengan Filamen St-Pla Pada Waterjet Thruster Mini Terhadap Performa Daya Dorong Dengan Metode Taguchi,” J. Inov. Teknol. Terap., vol. 2, no. 2, pp. 505–511, Aug. 2024, doi: 10.33504/jitt.v2i2.229.
[6] F. Kalbuadi and H. A. Kurniawati, “Desain Amphibious High Speed Ambulance Craft (HSAC) sebagai Penunjang Fasilitas Kesehatan di Kepulauan Raja Ampat,” J. Tek. ITS, vol. 9, no. 2, pp. G157–G163, Feb. 2021, doi: 10.12962/j23373539.v9i2.57254.
[7] Suardi, Alamsyah, M. U. Pawara, W. Setiawan, and A. N. Ramadana, “Kajian Eksperimental terhadap Sifat Kekuatan Tarik Material pada Poros Baling-Baling Kapal,” J. Ris. Teknol. Terap. Kemaritiman, vol. 2, no. 2, pp. 61–66, Dec. 2023, doi: 10.25042/jrt2k.122023.03.
[8] L. L. A. Nisa’ and S. Aritonang, “META ANALISIS PENGGUNAAN WATERJET PADA SISTEM PROPULSI KAPAL,” Citiz. J. Ilm. Multidisiplin Indones., vol. 2, no. 2, pp. 294–299, May 2022, doi: 10.53866/jimi.v2i2.79.
[9] N. R. Arini, D. Ramadhani, L. Diana, and R. R. Reivanda, “Modifikasi Sudut Masuk Impeller Pompa Sentrifugal Untuk Mengurangi Efek Kavitasi,” J. Appl. Civ. Eng. Infrastruct. Technol., vol. 6, no. 1, pp. 30–35, Mar. 2025, doi: 10.52158/jaceit.v6i1.984.
[10] M. A. Wahid and K. Muzaka, “OPTIMASI GAYA DORONG WATERJET UNTUK KAPAL IKAN DENGAN METODE TAGUCHI,” vol. 7, 2025.
[11] M. Seva, Z. Kurniawan, and H. Hasdiansah, “Optimasi Karakteristik Komponen Waterjet thruster terhadap Gaya Dorong Menggunakan Metode Taguchi,” J. Inov. Teknol. Terap., vol. 2, no. 2, Aug. 2024, doi: 10.33504/jitt.v2i2.145.
[12] M. Oktavianto, B. Rollastin, and H. Hasdiansah, “Optimasi Variasi Jumlah Blade Inlet Turbo dan Outlet Turbo Terhadap Gaya Dorong Pada Prototype Waterjet Thrusther Produk 3D Printing Menggunakan Metode Taguchi,” J. Inov. Teknol. Terap., vol. 2, no. 1, pp. 24–30, Feb. 2024, doi: 10.33504/jitt.v2i1.146.
[13] Thala Viniolita, H. Hasdiansah, and Z. S. Suzen, “Optimasi Variasi Jumlah Blade Inlet Turbo Pada Waterjet Thruster Mini Produk 3D Printing Dengan Filamen ST PLA Terhadap Gaya Dorong Menggunakan Metode Taguchi,” J. Inov. Teknol. Terap., vol. 2, no. 1, pp. 15–23, Feb. 2024, doi: 10.33504/jitt.v2i1.139.
[14] M. A. Siregar, W. S. Damanik, and Fakultas Teknik Universitas Muhammadiyah Sumatera Utara, “Pengaruh Variasi Sudut Keluar Impeler Terhadap Performance Pompa Sentrifugal,” J. Rekayasa Mater. Manufaktur Dan Energi, vol. 3, no. 2, pp. 166–174, Sept. 2020, doi: 10.30596/rmme.v3i2.5278.
[15] A. A. Machfud, R. A. Cahyapala, and A. F. Nurrahman, “STUDI COMPUTATIONAL FLUID DYNAMICS (CFD) UNTUK MENDIAGNOSA KEGAGALAN POMPA INJEKSI AIR,” J. Rekayasa Mesin, vol. 16, no. 1, pp. 507–520, June 2025, doi: 10.21776/jrm.v16i1.2131.
[16] W. M. Rumaherang, J. Louhenapessy, M. F. Noya, and C. S. Tupamahu, “STUDI EKSPERIMENTAL PERFORMANCE KAVITASI WATERJET PROPULSI,” 2021.
[17] E. L. Tahalele, C. A. Kesaulia, and M. G. Firmansyah, “STUDI PENGARUH KECEPATAN PUTAR IMPELLER TERHADAP PERFORMANCE MODEL WATERJET PROPULSOR,” J. Tek. Mesin Elektro Inform. Kelaut. Dan Sains, vol. 4, no. 1, pp. 108–118, June 2024, doi: 10.30598/metiks.2024.4.1.108-118.
[18] M. Idris et al., “Water flow simulation in a pelton turbine bucket with variable bucket dimensions using computational fluid dynamic,” JTTM J. Terap. Tek. Mesin, vol. 4, no. 2, pp. 207–214, Oct. 2023, doi: 10.37373/jttm.v4i2.633.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
11.jpg){kind=logo}
