ANALISIS TEKNIS PENAMBAHAN LUBANG PADA BAGIAN SKEG KAPAL TUGBOAT SERTA PENGARUHNYA TERHADAP ALIRAN DAN HAMBATAN MENGGUNAKAN METODE COMPUTATIONAL FLUID DYNAMICS

Authors

  • David Prayogo Program Studi Teknik Manufaktur Kapal, Politeknik Negeri Banyuwangi
  • Abdul Rohman Program Studi Teknik Manufaktur Kapal, Politeknik Negeri Banyuwangi
  • Jangka Rulianto Program Studi Teknik Manufaktur Kapal, Politeknik Negeri Banyuwangi
  • Khairul Muzaka Program Studi Teknik Manufaktur Kapal, Politeknik Negeri Banyuwangi
  • I Gusti Ngurah Bagus Catrawedarma Program Studi Teknik Manufaktur Kapal, Politeknik Negeri Banyuwangi

DOI:

https://doi.org/10.30871/jatra.v7i2.10163

Keywords:

Tugboat, Skeg, Fuid Flow, Hydrodynamic Drag, CFD

Abstract

Tugboats play a crucial role in supporting the safety and operational efficiency of ports and offshore activities. One of the key components in tugboat design is the skeg, which serves to enhance directional stability and reduce yawing effects. This study aims to analyze the influence of the number of holes in the skeg on the flow characteristics and resistance of a tugboat. Three skeg variations were tested: a skeg without holes, a skeg with two holes, and a skeg with four holes, under two speed conditions, namely 10 knots and 15 knots. The observed parameters include wetted surface area, drag force, and longitudinal flow velocity (velocity u). The simulation results indicate that the skeg without holes produced the lowest drag values, at 22.570 N at 10 knots and 138.430 N at 15 knots, along with a more stable and streamlined flow pattern. In contrast, adding holes to the skeg resulted in increased drag and flow disturbances in the form of vortices and fluid separation. Therefore, the skeg without holes is considered more hydro dynamically optimal for improving the operational efficiency of tugboats.

 

Downloads

Download data is not yet available.

References

[1] T. A. Mizan, A. Fiveriati, M. A. Wahid, and A. Hamid, “Analisa Kekuatan Konstruksi Pad Eye Towing Hook Kapal Tugboat 27 Meter Dengan Metode Elemen Hingga,” Jurnal Techno Bahari, vol. 12, no. 1, pp. 22–28, Mar. 2025.

[2] R. B. Harsi and E. Pranatal, “ANALISA PENGARUH PENAMBAHAN ENERGY SAVING DEVICE (ESD) PROPELLER BOSS CAP FIN (PBCF) TERHADAP PERFORMA PROPELLER B-SERIES PADA KAPAL RO-RO 600 GT,” SEMITAN, vol. 1, no. 1, pp. 319–326, Aug. 2022, doi: 10.31284/j.semitan.2022.3233.

[3] R. N. Pratama, P. Manik, and H. Yudo, “Analisa Pengaruh Penambahan Fin Keel terhadap Hambatan, Pola Aliran, dan Stabilitas pada Kapal Ferry Ro-Ro 1000 GT,” Jurnal Teknik Perkapalan, vol. 8, no. 3, pp. 443–453, July 2020.

[4] M. A. Zahril and P. Manik, “Analisa Pengaruh Penambahan Hull Fixed Bow Fin Terhadap Gerak Pitching dan Heaving Pada Kapal Tanker 112 Meter,” Jurnal Teknik Perkapalan, vol. 9, no. 2, pp. 206–214, July 2021.

[5] G. B. Pangestu, D. Chrismianto, G. Rindo, and J. Soedarto, “Analisa Pengaruh Penambahan Integrated Stern Wedge-Flap terhadap Hambatan Kapal dengan Metode CFD,” Jurnal Teknik Perkapalan, Vol. 9, No. 2 April 2021, vol. 9, no. 2, pp. 199–205, Apr. 2021.

[6] F. Fachruddin, S. Asri, and I. Anyelin, “Analisis Beban Pengelasan Konstruksi Sebuah Kapal Tug Boat 2x2200 HP Type ASD,” JRTP, vol. 2, no. 2, pp. 26–32, 2024.

[7] Z. T. S. Putra and I. K. A. P. Utama, “Analisis CFD Hambatan Kapal Katamaran dengan Stepped Hull Melintang,” JTITS, vol. 9, no. 2, pp. G76–G83, Feb. 2021, doi: 10.12962/j23373539.v9i2.56581.

[8] I. P. S. Asmara, K. Abdullah, A. N. Rochmad, and B. D. Alfanda, “ANALISIS HAMBATAN, STABILITAS, dan SEAKEEPING KAPAL PATROLI LEPAS PANTAI,” POLBENG, vol. 12, no. 1, pp. 23–27, 2022.

[9] R. Mahardi, Y. S. Hadiwidodo, and R. W. Prastianto, “Analisis Pengaruh Pergerakan Barge terhadap Pergerakan Struktur Riser Support Jacket pada Proses Lifting Tahap Instalasi,” JTITS, vol. 10, no. 2, pp. G58–G64, Dec. 2021, doi: 10.12962/j23373539.v10i2.66967.

[10] A. Santosa, B. Adietya, E. Hadi, and D. Chrismianto, “Analysis of the Effect of Addition of Bilge Keel, Bulbous Bow, Skeg and Combination on Value of Ship Resistance and Seakeeping of Ship using CFD Method:,” in Proceedings of the 7th International Seminar on Ocean and Coastal Engineering, Environmental and Natural Disaster Management, Surabaya, Indonesia: SCITEPRESS - Science and Technology Publications, 2019, pp. 88–93. doi: 10.5220/0010056900880093.

[11] D. S. Wibowo, A. K. Akbar, T. A. D. Rosta, H. N. Sukmawardana, and F. A. Rayhan, “Effects of Transom and Skeg Angle on Barge Drag and Seakeeping,” IOP Conf. Ser.: Earth Environ. Sci., vol. 1454, no. 1, p. 012012, Feb. 2025, doi: 10.1088/1755-1315/1454/1/012012.

[12] S. Turnock et al., “Hull-propeller-rudder interactions: Time-accurate data of a scaled model ship in waves,” Ocean Engineering, vol. 312, p. 119258, Nov. 2024, doi: 10.1016/j.oceaneng.2024.119258.

[13] H. I. D. Puspita, A. Yasim, R. Rudianto, R. K. K. Wibowo, R. F. Kusnadi, and M. A. N. Akmal, “PENGARUH PENAMBAHAN SKEG TERHADAP OLAH GERAK DAN HAMBATAN KAPAL NELAYAN DI PELABUHAN PERIKANAN PUGER, JEMBER,” JTPK, vol. 14, no. 2, pp. 169–179, Oct. 2023, doi: 10.24319/jtpk.14.169-179.

[14] R. Dewi, U. Budiarto, A. W. B. Santosa, E. S. Hadi, P. Manik, and O. Mursid, “PENGARUH PENAMBAHAN VARIASI GEOMETRI STERN FLAP TERHADAP NILAI HAMBATAN PADA KAPAL PATROLI PERIKANAN,” JSTM, vol. 22, no. 1, p. 1, Sept. 2021, doi: 10.33556/jstm.v22i1.296.

[15] S. F. Pamungkas, D. S. Wijayanto, and H. Saputro, “PENGARUH VARIASI PENAMBAHAN FIN TERHADAP CUT IN SPEED TURBIN ANGIN SAVONIUS TIPE S,” 2017.

[16] M. Tadros, M. Ventura, and C. Guedes Soares, “Review of the Decision Support Methods Used in Optimizing Ship Hulls towards Improving Energy Efficiency,” JMSE, vol. 11, no. 4, p. 835, Apr. 2023, doi: 10.3390/jmse11040835.

[17] R. Maulana, M. A. Asis, S. Baso, and L. Bochary, “Study Tahanan Kapal Ferry Ro-Ro Twin Skeg”.

[18] A. Sulisetyono, “The Wave Making Resistance Evaluation of The Fishing Ship With Skeg Using Tent Function Method,” IOP Conf. Ser.: Earth Environ. Sci., vol. 557, no. 1, p. 012040, Aug. 2020, doi: 10.1088/1755-1315/557/1/012040.

Downloads

Published

2025-12-30

How to Cite

David Prayogo, Abdul Rohman, Jangka Rulianto, Khairul Muzaka, & I Gusti Ngurah Bagus Catrawedarma. (2025). ANALISIS TEKNIS PENAMBAHAN LUBANG PADA BAGIAN SKEG KAPAL TUGBOAT SERTA PENGARUHNYA TERHADAP ALIRAN DAN HAMBATAN MENGGUNAKAN METODE COMPUTATIONAL FLUID DYNAMICS. Jurnal Teknologi Dan Riset Terapan (JATRA), 7(2), 77–85. https://doi.org/10.30871/jatra.v7i2.10163

Issue

Vol. 7 No. 2 (2025): Jurnal Teknologi dan Riset Terapan (JATRA) - December 2025

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.