A Design and Implementation of a 3-Axis UAV Drone Gimbal Rig for Testing Stability and Performance Parameters in the Laboratory
DOI:
https://doi.org/10.30871/jaic.v9i3.9577Keywords:
3-Axis UAV Gimbal Rig, Real-Time Monitoring, Arduino Controller, UAV Dynamics, Rotary Encoder LPD3806-600BM-G5gAbstract
This study designs a 3-axis UAV gimbal rig for testing stability and performance before deployment in real-world flight conditions. The gimbal rig simulates the vertical, lateral, and longitudinal axes to ensure reliable operation in various scenarios. Made from lightweight aluminum alloy, the structure minimizes vibrations and maintains rigidity during testing. For precise motion tracking, each axis is equipped with an LPD3806- 600BM-G5 rotary encoder, offering accurate feedback on movement. The Arduino Nano processes the encoder data, displaying real-time results on a 16x2 LCD with an I2C interface for easy monitoring. Additionally, a push-button system enables users to switch between different readings for each axis. This setup aids researchers in analyzing UAV dynamics and refining both firmware and hardware. Future enhancements may include wireless data logging and integration of machine learning techniques to predict maintenance needs, further supporting UAV stability testing in various applications, including aerospace, defense, and commercial use.
Downloads
References
[1] R. Casado and G. Ferna, “Drone challenge : A platform for promoting programming and robotics skills in K-12 education,” no. February, pp. 1–19, 2019, doi: 10.1177/1729881418820425.
[2] S. Samsugi, Z. Mardiyansyah, and A. Nurkholis, “Sistem Pengontrol Irigasi Otomatis Menggunakan Mikrokontroler Arduino Uno,” J. Teknol. dan Sist. Tertanam, vol. 1, no. 1, p. 17, 2020, doi: 10.33365/jtst.v1i1.719.
[3] U. Fadlilah and N. Saniya, “Monitoring Suhu Kabel Trafo melalui Tampilan LCD dan SMS,” Emit. J. Tek. Elektro, vol. 17, no. 2, pp. 42–49, 2017, doi: 10.23917/emitor.v17i2.6229.
[4] D. Xia, L. Cheng, and Y. Yao, “A robust inner and outer loop control method for trajectory tracking of a quadrotor,” Sensors (Switzerland), vol. 17, no. 9, 2017, doi: 10.3390/s17092147.
[5] S. Ahirwar, R. Swarnkar, S. Bhukya, and G. Namwade, “Application of Drone in Agriculture,” Int. J. Curr. Microbiol. Appl. Sci., vol. 8, no. 01, pp. 2500–2505, 2019, doi: 10.20546/ijcmas.2019.801.264.
[6] D. Giuseppe and G. Adrián, “MOUNTED ON A GYROSCOPIC TEST,” pp. 1–170, 2023.
[7] W. Rahiman, “Infrared Sensor and PWM Integration Using FPGA Platform for Ground Vehicle Navigation and Speed Control,” vol. 1, no. 1, pp. 1–8, 2021.
[8] A. Iannarelli, M. G. Niasar, and R. Ross, “Sensors and Actuators A : Physical Electrode interface polarization formation in dielectric elastomer actuators,” Sensors Actuators A. Phys., vol. 312, p. 111992, 2020, doi: 10.1016/j.sna.2020.111992.
[9] O. I. Adebisi, A. B. Ogundare, T. C. Erinosho, M. O. Sonola, and A. R. Adesanu, “Development of a microcontroller and resistive touchscreen-based speed monitoring and control system for DC motor,” Int. J. Adv. Appl. Sci., vol. 12, no. 4, pp. 350–360, 2023, doi: 10.11591/ijaas.v12.i4.pp350-360.
[10] S. J. Sutanto and B. W. Ridwan, “Teknologi Drone Untuk Pembuatan Peta Kontur: Studi Kasus Pada Kawasan P3Son Hambalang,” J. Tek. Hidraul., vol. 7, no. 2, pp. 179–194, 2016.
[11] K. Castelli and H. Giberti, “Additive manufacturing as an essential element in the teaching of robotics,” Robotics, vol. 8, no. 3, pp. 1–13, 2019, doi: 10.3390/robotics8030073.
[12] E. N. Afifah Amatullah, R. Ekawita, and E. Yuliza, “Comparison of Infrared and Optocoupler Sensors Performance for Lab-Scale Rpm Measurement System,” Indones. Phys. Rev., vol. 5, no. 2, pp. 130–136, 2022, doi: 10.29303/ipr.v5i2.150.
[13] P. Sapkota, N. Pokharel, R. Silwal, S. Chitrakar, H. P. Neopane, and B. Thapa, “Rotational Speed Measurement of a Shaft Using Infrared Sensor with NI Data Acquisition system and LabVIEW,” J. Phys. Conf. Ser., vol. 2629, no. 1, 2023, doi: 10.1088/1742-6596/2629/1/012020.
[14] M. J. Mnati, A. Van den Bossche, and R. F. Chisab, “A smart voltage and current monitoring system for three phase inverters using an android smartphone application,” Sensors (Switzerland), vol. 17, no. 4, 2017, doi: 10.3390/s17040872.
[15] T. Lisec, S. Fichtner, N. Funck, M. Claus, B. Wagner, and F. Lofink, “Sensors and Actuators A : Physical AlScN based MEMS quasi-static mirror matrix with large tilting angle and high linearity,” Sensors Actuators A. Phys., vol. 312, p. 112107, 2020, doi: 10.1016/j.sna.2020.112107.
[16] A. Sudarmaji, A. Y. Putra, and E. Yudiarsah, “Viscous Damping Coefficient Measurement System Using Incremental Optical Encoder,” FLYWHEEL J. Tek. Mesin Untirta, no. June 2023, p. 1, 2023, doi: 10.36055/fwl.v0i0.19525.
[17] M. Khaleel, M. Emimi, and A. Alkrash, “The Current Opportunities and Challenges in Drone Technology International Journal of Electrical Engineering and Sustainability (IJEES) The Current Opportunities and Challenges in Drone Technology,” Int. J. Electr. Eng. Sustain., vol. 1, no. 3, pp. 74–89, 2023, [Online]. Available: https://ijees.org/index.php/ijees/index
[18] R. A. Firmansyah, Y. A. Prabowo, T. Suheta, A. Nanda, and D. Utomo, “MITOR : Jurnal Teknik Elektro,” 2024.
[19] B. Şimşek and H. Ş. Bilge, “A novel motion blur resistant vslam framework for micro/nano-uavs,” Drones, vol. 5, no. 4, 2021, doi: 10.3390/drones5040121.
[20] W. Wójcik et al., “Metrological Aspects of Controlling the Rotational Movement Parameters of the Auger for Dewatering Solid Waste in a Garbage Truck,” Int. J. Electron. Telecommun., vol. 69, no. 2, pp. 233–238, 2023, doi: 10.24425/ijet.2023.144355.
[21] J. Paik, M. Carlson, Z. Richter, T. Van, D. Berg, and R. Zhan, “Automated Drone Calibration System Final Design Review Inspired Flight Calibration Team,” no. June, 2020.
[22] V. Oguntosin and A. Akindele, “Design of a joint angle measurement system for the rotary joint of a robotic arm using an Incremental Rotary Encoder,” J. Phys. Conf. Ser., vol. 1299, no. 1, 2019, doi: 10.1088/1742-6596/1299/1/012108.
[23] Z. S. Islami and F. Hartono, “Development of small propeller test bench system,” IOP Conf. Ser. Mater. Sci. Eng., vol. 645, no. 1, 2019, doi: 10.1088/1757-899X/645/1/012017.
[24] U. Veyna, S. Garcia-Nieto, R. Simarro, and J. V. Salcedo, “Quadcopters testing platform for educational environments,” Sensors, vol. 21, no. 12, 2021, doi: 10.3390/s21124134.
[25] Azhari, T. I. Nasution, S. H. Sinaga, and Sudiati, “Design of Monitoring System Temperature And Humidity Using DHT22 Sensor and NRF24L01 Based on Arduino,” J. Phys. Conf. Ser., vol. 2421, no. 1, 2023, doi: 10.1088/1742-6596/2421/1/012018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Ryan Satria Wijaya, Zulpriadi Zulpriadi, Senanjung Prayoga, Rifqi Amalya Fatekha
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
