IoT-based Soil Nutrient Monitoring and Control Using Fuzzy Logic and Multi-Modal Sensor Integration
DOI:
https://doi.org/10.30871/jaic.v9i5.10575Keywords:
Soil Nutrition Quality, Fuzzy Logic Method Multi-Modal Sensor Integration, Internet of Things (IoT), Automatic Monitoring and ControlAbstract
The decline in soil quality due to inappropriate agricultural practices has become one of the main factors contributing to reduced agricultural productivity. The primary focus of this research is on monitoring and controlling soil nutrient quality, particularly in clay soil used for chili cultivation. This study aims to develop an Internet of Things (IoT)-based monitoring system integrated with multi-modal sensors and fuzzy logic algorithms. The system is designed to support precision agriculture by enabling automated decision-making based on real-time environmental data. The research uses an experimental approach, involving the design of a system based on the ESP32 microcontroller, sensor data processing using the Mamdani fuzzy algorithm, and integration with the Blynk platform for remote monitoring and control. The system responds to changes in environmental conditions to determine optimal timing for irrigation and liquid nutrient application adaptively. The test results show that the system achieved a classification accuracy of 84% and an average F1-score of 88.5%, indicating its effectiveness in handling continuous and uncertain sensor data. Evaluation of the fuzzy logic performance revealed a 75.8% success rate in irrigation control and 99.8% accuracy in nutrient delivery, demonstrating the system’s ability to respond accurately and efficiently to actual soil and environmental conditions. With its stable, adaptive, and resource-efficient performance, this system has the potential to become a practical solution for automating irrigation and fertilization processes in support of technology-driven and sustainable agriculture.
Downloads
References
[1] S. A. Suherman and D. Widyaningrum, “Implementation of Tsukamoto Fuzzy in an Internet of Things-Based Spinach Cultivation System,” Smatika Journal, vol. 14, no. 01, pp. 195– 204, 2024, doi: 10.32664/smatika.v14i01.1332.
[2] A. D. Wahyuningtias, “Analysis of the Impact of Agricultural and Trade Sectors on the Gross Regional Domestic Product of Magelang Regency,” Journal of Economic Research and Policy Studies, vol. 1, no. 1, pp. 1–11, 2021, doi: 10.53088/jerps.v1i1.23.
[3] A. Febriana, N. M. Trigunasih, and M. S. Sumarniasih, “Soil Quality Analysis and Management Direction in the Unda Watershed, Bali Province, Indonesia,” Agro Bali Agricultural Journal, vol. 7, no. 1, pp. 227–245, 2024, doi: 10.37637/ab.v7i1.1309.
[4] Z. Multazam and U. G. Mada, “Soil Remediation and Degraded Land Restoration,” unpublished manuscript, Mar. 2024.
[5] L. M. Harahap, N. L. U. Sidebang, G. K. D. Harahap, and R. Sitompul, “Strategy for Optimizing Orange Fruit Quality Using Technology: Case Study of Sidikalang Orange Farm,” Economics: Journal of Economics and Business, vol. 3, no. 2, pp. 59–63, 2024, doi: 10.56495/ejeb.v3i2.592.
[6] Y. Wu, Z. Yang, and Y. Liu, “Internet-of-Things-Based Multiple- Sensor Monitoring System for Soil Information Diagnosis Using a Smartphone,” Micromachines, vol. 14, no. 7, 2023, doi: 10.3390/mi14071395.
[7] E. Kaskar, J. Lase, E. J. Ndruru, U. Nias, and U. Nias, “Application of Soil Physics Model to Predict Water and Nutrient Movement in the System,” vol. 01, pp. 53–59, 2024.
[8] G. Santoso, S. Hani, and R. Prasetiyo, “Monitoring System for Paddy Soil Quality Using Temperature and Moisture Parameters Based on the Internet of Things (IoT),” Proceedings of the National Seminar on Technoka, vol. 5, no. 2502, pp. 146–155, 2020, doi: 10.22236/teknoka.v5i.297.
[9] M. D. Purwanto, H. Sujadi, and I. Marina, “Design of an IoT-Based Monitoring Tool for Soybean Soil Quality,” pp. 272–277, 2024.
[10] K. Anwar, D. Syauqy, and H. Fitriyah, “Nutrient Content Detection System in Soil Based on Color and Moisture Using Naive Bayes Method,” Journal of Information Technology and Computer Science Development, vol. 2, no. 9, pp. 2491–2498, 2018. [Online].
Available: http://j-ptiik.ub.ac.id
[11] M. S. Gozali et al., “Portable Multimeter for Agricultural Soil Nutrient Measurement for Farmer Groups in Setokok Island,” Journal of Community Service, Batam State Polytechnic, vol. 5, no. 1, pp. 84–96, 2023, doi: 10.30871/abdimaspolibatam.v5i1.5543.
[12] H. Susanto, T. Elektro, and P. Negeri Bengkalis, “Design of Automatic Irrigation and Nutrient System for Agricultural Land Based on IoT (Internet of Things),” National Seminar on Industry and Technology (SNIT), State Polytechnic of Bengkalis, vol. 9, 2022: SNIT 2022, pp. 73–81, [Online]. Available: https://snit
[13] I Ketut Wahyu Gunawan and Cinthya Bella, “Monitoring of Rice
Moisture Using a Microcontroller-Based Humidity Sensor,” Portaldata, vol. 1, no. 3, pp. 1–23, 2021.
[14] M. Unik and D. Mualfah, “IoT-Based Soil pH and Moisture Monitoring System for Optimizing Eggplant Growth,” Journal of Computer Science and Information Technology (CoSciTech), vol. 5, no. 3, pp. 680–686, 2024.
[15] T. Elektro, “Implementation of LM35 Temperature Sensor in Applied Electronics Circuit,” vol. 2, no. 4, pp. 1–14, 2021.
[16] A. Rofii, S. Gunawan, and A. Mustaqim, “Design and Development of an IoT-Based Warehouse Door Security System Using Fingerprint Sensor,” Journal of Electrical Engineering Review, vol. 6, no. 2, pp. 70–76, 2022, doi: 10.52447/jkte.v6i2.5735.
[17] U. Sholikhah, B. Rosyadi, S. R. Wahzuni, S. U. Alasna, and K. F.
P. Maharani, “Design of a Web-Based School Information System at MI Manbail Futuh Jenu Tuban,” Indonesian Journal of Information Systems (IJIS), vol. 9, no. 2, pp. 120–131, 2024.
[18] W. A. Praditya, L. Rakhmawati, S. Zuhrie, and P. Diptya Widayaka, “Lighting System Prototype for Individuals with Autism Using Face Recognition Based on Raspberry Pi,” 2020.
[19] E. Sanz et al., “Cloud-Based System for Monitoring Event-Based Hydrological Processes Based on Dense Sensor Network and NB- IoT Connectivity,” Environmental Modelling & Software, vol. 182, May 2024, doi: 10.1016/j.envsoft.2024.106186.
[20] N. Mohana Priya, “IoT and Machine Learning-Based Precision Agriculture Through the Integration of Wireless Sensor Networks,” Journal of Electrical Systems, vol. 20, no. 4s, pp. 2292–2299, 2024, doi: 10.52783/jes.2399.
[21] K. Sharma and S. K. Shivandu, “Integrating Artificial Intelligence and Internet of Things (IoT) for Enhanced Crop Monitoring and Management in Precision Agriculture,” Sensors International, vol. 5, July, p. 100292, 2024, doi: 10.1016/j.sintl.2024.100292.
[22] M. A. Pamungkas et al., “Community Empowerment Through the Implementation of Smart Farming to Improve the Efficiency of Organic Paddy Cultivation in Glagahwangi Village, Klaten Regency,” Community Development Journal, vol. 4, no. 4, pp. 8496–8503,
2023.
[23] I. S. Hasugian, E. Kurniawan, and D. Purwitasari, “Design of a CO₂ Gas Safety System in a CO₂ Cylinder Storage Room Using Raspberry Pi Pico W,” vol. 3, no. 3, 2024.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Andi Wahyunita Hakis, Abdul Latief Arda, Abdul Jalil

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).








