Implementasi Sistem Pemantauan Energi Listrik dan Perbaikan Faktor Daya Berbasis Android dengan MIT App Inventor dan Firebase
DOI:
https://doi.org/10.30871/jaee.v9i2.11615Kata Kunci:
kelistrikan, efisisiensi energi, IoT, Android, Beban Induktif, MIT App InventorAbstrak
Listrik merupakan salah satu kebutuhan pokok dalam kehidupan. Penggunaan beban induktif seperti mesin cuci, pompa air, kipas angin, dan lemari es menyebabkan peningkatan kebutuhan energi reaktif serta penurunan faktor daya. Pada sistem rumah tangga, faktor daya yang rendah dapat memicu perangkat proteksi listrik seperti MCB dan ELCB terjadi trip. PLN menetapkan nilai minimum faktor daya sebesar >0,85. Tujuan utama dari perbaikan faktor daya adalah untuk meningkatkan kapasitas sistem dan mengoptimalkan konsumsi daya listrik. Salah satu solusi yang dapat diterapkan adalah pemasangan bank kapasitor untuk menyuplai daya reaktif ke dalam sistem, sehingga nilai faktor daya dapat meningkat. Pada penelitian ini, MIT App Inventor dan Firebase digunakan sebagai aplikasi pemantauan. Proses pengiriman data ke aplikasi Android menunjukkan rata-rata waktu tunda sebesar 11,20 detik. Berdasarkan pengujian dengan 11 variasi beban, diperoleh rata-rata nilai faktor daya yang lebih baik setelah dilakukan perbaikan.
Unduhan
Referensi
[1] M. Sofyan and I. Made Sudana, “Analisis Potensi Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Berdasarkan Debit Air dan Kebutuhan Energi Listrik,” JuLIET), vol. 3, no. 2, 2022.
[2] Ulkya Maisarah, Puti Andiny, and Safuridar Safuridar, “Pengaruh Tingkat Penggunaan Energi Listrik terhadap Pertumbuhan Ekonomi di Indonesia,” Jurnal Ekonomi dan Pembangunan Indonesia, vol. 2, no. 4, pp. 59–68, 2024, doi: 10.61132/jepi.v2i4.943.
[3] H. F. dkk Situmorang, “Analisis Penggunaan Kapasitor Bank Dalam Upaya Perbaikan Faktor Daya Pada Low Voltage Main Distribution Panel (LVMDP) Di PT.Permata Hijau Palm Oleo (PHPO) KIM II,” vol. 7, pp. 990–1001, 2024.
[4] N. Fartino, T. Tarmizi, and M. Syukri, “Kajian Perancangan Alat Perbaikan Faktor Daya Otomatis,” Jurnal Komputer, Informasi Teknologi, dan Elektro, vol. 5, no. 1, pp. 11–18, 2020, doi: 10.24815/kitektro.v5i1.15543.
[5] H. A. A. Wicaksono, S. Handoko, and A. A. Zahra, “Analisis Perbaikan Faktor Daya Dan Nilai Tegangan Di Poltekkes Semarang,” Transient: Jurnal Ilmiah Teknik Elektro, vol. 10, no. 2, pp. 327–334, 2021, doi: 10.14710/transient.v10i2.327-334.
[6] B. Rudianta, M. Hafizhuddin, and A. Syakur, “Perbaikan Faktor Daya Beban Induktif di Industri dengan Menggunakan Kapasitor Shunt,” JTET (Jurnal Teknik Elektro Terapan), vol. 11, no. 3, pp. 77–82, 2022.
[7] A. P. Lifere, N. Nursalim, and E. R. Mauboy, “Rancang Bangung Sistem Otomasi Perbaikan Kualitas Daya Skala Rumah Tangga,” Jurnal Media Elektro, vol. IX, no. 1, pp. 39–46, 2020, doi: 10.35508/jme.v0i0.2676.
[8] M. M. dkk Zakaria, “Sistem Perbaikan Faktor Daya Secara Otomatis Dengan Pemantauan Energi Listrik Terintegrasi Dengan Smartphone,” SNESTIK, pp. 29–34, 2022.
[9] B. Ferdiansah and F. Ahmad, “Analisis Pengaruh Kapasitor Bank Terhadap Nilai Faktor Daya dan Nilai Jatuh Tegangan,” vol. 5, pp. 234–241, 2023.
[10] A. Pangestu, N. M. Pd, R. Dian, and M. M. Eng, “Optimization of Swimming Pool Maintenance Using An IoT-Based Swimming Pool Water Quality Monitoring System And Telegram Notification Sistem Monitoring Kualitas Air Kolam Renang,” vol. 5, no. 1, pp. 8–21, 2024.
[11] I. Fitriyah, I. Wiyokusumo, and I. P. Leksono, “Pengembangan media pembelajaran Prezi dengan model ADDIE simulasi dan komunikasi digital,” Jurnal Inovasi Teknologi Pendidikan, vol. 8, no. 1, pp. 84–97, 2021, doi: 10.21831/jitp.v8i1.42221.
[12] A. K. P. Ningrum, H. Nindiasari, and A. Hendrayana, “Pengembangan Instrumen Numerasi Domain Bilangan dalam Konteks Personal pada Siswa SMP,” Jurnal Educatio FKIP UNMA, vol. 10, no. 3, pp. 804–811, 2024, doi: 10.31949/educatio.v10i3.9132.
[13] A. Aulia, R. Rahmi, and H. Jufri, “Pengembangan Media Pembelajaran Berbasis Android Menggunakan MIP App Inventor pada Materi Barisan dan Deret Aritmatika Kelas X SMKN 1 Kinali,” Jurnal Cendekia : Jurnal Pendidikan Matematika, vol. 6, no. 2, pp. 1475–1485, 2022, doi: 10.31004/cendekia.v6i2.1329.
[14] M. Z. Z. Muhtadi, S. Ranolat, and Pujianto, “Sistem Monitoring Energi Listrik 3 Fase Berbasis IoT dan Firebase,” Elposys: Jurnal Sistem Kelistrikan, vol. 12, no. 2, pp. 132–137, 2025, doi: 10.33795/elposys.v12i2.7206.
[15] M. Sahar, M. Hayati, S. Syahrizal, A. Gunawan, and A. Alfizah, “Rancang Bangun Trainer PLTS On Grid dan Off Grid Sebagai Penunjang Praktikum,” Jurnal Teknologi Dan Sistem Informasi Bisnis, vol. 6, no. 3, pp. 385–394, 2024, doi: 10.47233/jteksis.v6i3.1373.
[16] R. Manullang, Aplikasi Google Sketchup untuk Desain 3 Dimensi. Elex Media Komputindo, 2019.
[17] T. B. Nguyen and T. C. Nguyen, “Design and fabrication of an IoT-based smart electrical meter for residential energy management,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 30, no. 3, pp. 1259–1268, 2023, doi: 10.11591/ijeecs.v30.i3.pp1259-1268.
[18] R. P. Pratama, “Rancang Bangun Alat Pengukur Data Kelistrikan dengan Aplikasi Android MQTT Dash,” Elektriese: Jurnal Sains dan Teknologi Elektro, vol. 12, no. 01, pp. 63–72, 2022, doi: 10.47709/elektriese.v12i01.1673.
[19] M. Ihsan, A. R. Al Muttaqi, U. A. Ahmad, J. S. Wicaksana, and F. Azmi, “Development of 3 Phase Pump Panel Monitoring System based on Internet of Things (Case Study PERUMDAM),” [CEPAT] Journal of Computer Engineering: Progress, Application and Technology, vol. 1, no. 01, p. 23, 2022, doi: 10.25124/cepat.v1i01.4846.
[20] N. K. Hasanah, P. T. Asmoro, and F. S. Hadisantoso, “Daya Pada Beban Variatif Dengan Sistem,” vol. 4, no. 2, pp. 44–50, 2024.
[21] F. Hunaini, A. Ridho Adisyahrudin, and S. Setiawidayat, “Perbaikan Faktor Daya Pada Beban Listrik Skala Rumah Tangga Dengan Metode Fuzzy Logic,” JASEE Journal of Application and Science on Electrical Engineering, vol. 4, no. 2, pp. 11–21, 2023, [Online]. Available: https://jurnal.widyagama.ac.id/index.php/jasee/article/view/434
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself.









