Sistem Penyortir Selang Infus Secara Otomatis Berdasarkan Standar Produk 20G dan 25G
DOI:
https://doi.org/10.30871/jaee.v9i1.9483Keywords:
Flow switch, Otomasi, Selang infus, Sorting objekAbstract
Penelitian ini bertujuan untuk merancang dan mengimplementasikan sistem penyortiran salah satu produk medis yaitu selang infus secara otomatis. Sistem yang dikembangkan menggunakan PLC, pneumatik dan Digital Flow Switch. Proses pengujian sistem menggunakan dua standar produk selang infus yaitu standar produk 20G dan 25G. Proses pendeteksian selang infus dikategorikan dalam dua kategori yaitu reject atau accept dengan cara mengamati nilai keluaran pada digital flow switch. Hasil penelitian menunjukkan bahwa produk dikategorikan sebagai produk reject apabila nilai keluaran pada standar produk 20G dan 25G adalah 0,00 L/min. Sementara produk dikategorikan sebagai produk accept apabila nilai keluaran pada standar produk 20G ada pada rentang 4,05 L/min sampai 4,40 L/min sedangkan pada standar produk 25G pada rentang 0,67 L/min sampai 0,92 L/min.
Downloads
References
[1] K. Batubara, H. K. Siregar, E. Sinaga, and R. Pangaribuan, “Pengaruh Perawatan Daerah Pemasangan Infus Terhadap Kejadian Phlebitis Di Rs Kota Kisaran,” J. Ilmu Keperawatan Med. Bedah, vol. 4, no. 2, pp. 58–66, 2021, doi: 10.32584/jikmb.v4i2.1124.
[2] Ruslan Agussalim, “Monitoring Cairan Infus Berdasarkan Indikator Kondisi,” J. Ilm. Ilk., vol. 8, no. Desember, pp. 145–152, 2016.
[3] A. Zainuri, D. Santoso, and M. Muslim, “Monitoring Dan Identifikasi Gangguan Infus Menggunakan Mikrokontroler AVR,” J. EECCIS, vol. 6, no. 1, pp. 49–54, 2012.
[4] E. Ihsanto and I. Buchori, “Disain Dan Implementasi Sistem Monitoring Pengisian Cairan Melalui Wifi Dan Web,” Sinergi, vol. 21, no. 1, p. 65, 2017, doi: 10.22441/sinergi.2017.1.010.
[5] H. Ulfa, S. Purwanto, and Hikayati, “Prototype Sederhana Alat Monitoring Aliran Darah Naik Ke Selang Infus a Simple Prototype Blood Flow Monitoring Toolgoes Up Tothe Infusion Hose,” J. Keperawatan Sriwij., vol. 6, no. 1, pp. 27–34, 2019.
[6] D. M. Faiz and R. Khana, “Rаncаng Bаngun Sіstеm Pеmаntаuаn Dаn Pеngеndаlіаn Cаіrаn Іnfus Mеlаluі Dіsplаy Cоntrоl Dеngаn Pеnyіmpаnаn Fіrеbаsе Rеаltіmе Dаtаbаsе,” J. Kaji. Tek. Elektro, vol. 7, no. 1, pp. 29–35, 2022, doi: 10.52447/jkte.v7i1.5733.
[7] A. Amelia and K. Prawiroredjo, “Rangkaian Pengatur Aliran Cairan Infus Berbasis Atmega 8535,” Jetri J. Ilm. Tek. Elektro, vol. 14, pp. 29–40, 2017, doi: 10.25105/jetri.v14i2.816.
[8] M. F. Syauqi, . J., M. Zaini, and . N., “Implementasi Microcontroller Arduino Dalam Rancang Bangun Pendeteksi Naiknya Darah Pada Selang Infus,” Technol. J. Ilm., vol. 13, no. 1, p. 72, 2022, doi: 10.31602/tji.v13i1.5891.
[9] T. Abdurrachman, H. Andrianto, and N. Khoirunnisa, “Prototipe Pemantauan Tetesan Infus Berbasis Komputer Menggunakan Esp8266,” Innov. J. Soc. Sci. Res. Vol., vol. 4, no. 1, pp. 11609–11622, 2024.
[10] P. Asli, N. Lasiyah, R. Syahputra, and F. Ramadhan, “Rancang Bangun Infus Pump Dan Pendeteksi Darah,” vol. 8, pp. 58–67, 2025.
[11] et all. Kornelia Agnes, “Perancangan Keran Selang Infus Digital,” pp. 1–6, 2018.
[12] S. Pengajar, T. Elektro, P. Negeri, S. R. Zelio, and S. Relay, “Blok diagram Kontrol Infus Pasien Pengendali alat Kontrol Infus Pasien menggunakan penjepit selang infus dan pemancar bell wireless untuk mengaktifkan bell sebagai sistem akan bekerja . Ketika sensor akan motor untuk mengaktifkan penjepit selang infus,” vol. 16, no. 3, pp. 177–181, 2020.
[13] J. D. Liestanto, I. G. P. W. W. Wirawan, and A. H. Jatmika, “Rancang Bangun Sistem Monitoring Massa Infus Berbasis Iot Menggunakan Sensor Load Cell Dan Vibration Motor Untuk Notifikasi,” J. Teknol. Informasi, Komputer, dan Apl. (JTIKA ), vol. 5, no. 1, pp. 42–52, 2023, doi: 10.29303/jtika.v5i1.240.
[14] P. T. Elektro et al., “Penerapan Flow Switch Sebagai Kontrol Aliran Air Pada Mesin Pompa 3 Phasa Gedung Smf Rsud Ulin,” pp. 3–4.
[15] Z. Indra, “Aplikasi Flow Switch Pada Rancang Bangun Sirkulasi Air Rumah Tinggal Abstrak Prosiding Seminar Nasional Teknik Elektro Volume 4 Tahun 2019,” vol. 4, pp. 2–6, 2019.
Downloads
Published
Versions
- 2025-06-28 (2)
- 2025-06-28 (1)
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself.
