Desain Sistem Akuisisi Data Sensor Tekanan pada Kit Pressure Plant menggunakan OPC, SCADA dan PLC CP1H
Abstract
SCADA (Supervisory Control and Data Acquisition) merupakan sistem yang digunakan untuk pengawasan, pengendalian, dan pengumpulan data suatu proses industri. Sistem ini telah banyak digunakan di berbagai industri. Seiring dengan berkembangnya otomasi industri muncul kebutuhan untuk mengembangkan modul praktikum bagi mahasiswa program studi instrumentasi di Politeknik Negeri Batam. Salah satu dari modul tersebut adalah CE101 Pressure Measurement and Control Plant dengan pengembangan berupa penambahan sistem akuisisi data berbasis PLC CP1H, tampilan antarmuka menggunakan aplikasi SCADA Indusoft Web Studio dan penggunaan OPC untuk sistem komunikasi. PLC CP1H tipe XA40DR-A dipilih karena memiliki port AD/DA yang dapat digunakan sebagai input dan output bagi sensor analog. Dari hasil pengujian terlihat kedua pressure transmitter yang digunakan memiliki karakteristik linier sesuai dengan spesifikasi perangkatnya. Hasil pengujian sistem akuisisi data, hasil pengukuran menunjukkan nilai persamaan sensor kapasitansi : Y = 1.24X – 0.33 dan ektensimetrik : Y = 0.79X – 0.51 pada pengukuran tegangan berdasarkan nilai tekanan. Penelitian ini juga menghasilkan tampilan antar muka SCADA di indusoft web studio yang dapat menampilkan nilai sensor dalam satuan bar. Walaupun demikian error yang diperoleh masih cukup besar berkisar antara 11% sampai dengan 13%. Salah satu penyebabnya adalah kurangnya jumlah data yang diambil untuk membentuk persamaan regresi.
Downloads
References
M. S. Gozali, A. G. Darmoyono, H. Wijanarko, A. D. Futra, K. Kamarudin, and C. A. B. L. Tobing, “Akuisisi Data Pressure Transmitter melalui CX Supervisor pada STEM Pressure Measurement and Control Plant,” Journal of Applied Electrical Engineering, vol. 7, no. 1, pp. 31–36, Jun. 2023, doi: 10.30871/JAEE.V7I1.5397.
Yusman, Z. Zambi, and A. Finawan, “Implementation of Vijeo Citect in SCADA-Based Industrial Plant Level and Pressure Control,” Proceeding of International Conference on Multidisciplinary Research, vol. 6, no. 1, pp. 35–42, Jan. 2024, doi: 10.32672/PICMR.V6I1.750.
H. A. A. Al-Asadi and A. A. J. Chlaihawi, “Remotely controlled water channel system for laboratory education utilizing internet of things and SCADA technologies,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 31, no. 3, pp. 1266–1273, Sep. 2023, doi: 10.11591/IJEECS.V31. I3.PP1266-1273.
S. U. Uddin, M. J. A. Baig, and M. T. Iqbal, “Design and Implementation of an Open-Source SCADA System for a Community Solar-Powered Reverse Osmosis System,” Sensors 2022, Vol. 22, Page 9631, vol. 22, no. 24, p. 9631, Dec. 2022, doi: 10.3390/S22249631.
D. A. Morales-Ortega, V. H. Cambrón-Sandoval, I. Ruiz-González, H. Luna-Soria, J. A. Hernández-Guerrero, and G. García-Guzmán, “Design of a Tension Infiltrometer with Automated Data Collection Using a Supervisory Control and Data Acquisition System,” Sensors (Basel), vol. 23, no. 23, Dec. 2023, doi: 10.3390/S23239489.
M. Khusniyah, E. Sulistio Budi, and H. K. Safitri, “Sistem Kendali PID Menggunakan PLC CP1H dan HMI pada Aplikasi Miniplant Tekanan Udara,” Jurnal Elektronika dan Otomasi Industri, vol. 8, no. 3, 2021, doi: 10.33795/elkolind. v8i3/266.
I. N. Agiska, E. Sulistio Budi, and H. K. Safitri, “Sistem Kendali PI Menggunakan PLC CP1H dan HMI pada Aplikasi Miniplant Pemanas Air,” Jurnal Elektronika dan Otomasi Industri, vol. 8, no. 3, 2021, doi: 10.33795/elkolind. v8i1.
H. Mahakim, M. Rifa’i, and D. Dewatama, “Perancangan Sistem SCADA Pada Kontrol Flow dan Pressure Dengan Metode PID,” Jurnal Elektronika dan Otomasi Industri, vol. 8, no. 2, 2021, doi: 10.33795/elkolind. v8i2.281.
R. Listiana and A. Febrianto, “Analisis Akuisisi Data pada Sistem SCADA Pengaturan Tekanan Udara,” Journal of Informatics and Electronics Engineering, vol. 2, no. 1, pp. 1–5, Jun. 2022, Accessed: Jun. 11, 2024. [Online]. Available: https://ejournal.poltektedc.ac.id/index.php/jiee/article/view/602
F. Akmal, Afianiq R.A., Dhia S.M., A. Anicetus Damar, W. Danang, “Perancangan Dan Realisasi Pengendalian Kecepatan Motor Booster Pump Menggunakan Vsd Berbasis Plc-Hmi Terintegrasi Scada, Prosiding Senantias: Seminar Nasional Hasil Penelitian dan Pengabdian kepada Masyarakat.” Accessed: Jun. 11, 2024. [Online]. Available: https://openjournal.unpam.ac.id/index.php/Senan/article/view/32091
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
Its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself.
