Studi Pengaruh Nilai Availability Mesin Stamping Terhadap Jumlah Hasil Produksi

Adi Syahputra Purba; Nur Fitria Pujo Leksonowati; Nurman Pamungkas; Nidia Yuniarsih; Ninda Hardina Batubara; Dimas Prasetyo

doi:10.30871/ji.v16i2.8536

Penulis

Adi Syahputra Purba Politeknik Negeri Batam
Nur Fitria Pujo Leksonowati Politeknik Negeri Batam
Nurman Pamungkas Politeknik Negeri Batam
Nidia Yuniarsih Politeknik Negeri Batam
Ninda Hardina Batubara Politeknik Negeri Batam
Dimas Prasetyo Politeknik Negeri Batam

DOI:

https://doi.org/10.30871/ji.v16i2.8536

Kata Kunci:

Availability, MTBF, MTTR, Downtime, Korelasi, Output produksi, Pemeliharaan preventif

Abstrak

Penelitian ini bertujuan untuk menganalisis pengaruh availability mesin terhadap output produksi di PT XYZ. Pengumpulan data dilakukan selama periode Januari hingga Maret 2024, dengan fokus pada downtime mesin, total waktu operasional, dan jumlah produksi mingguan. Metode yang digunakan melibatkan perhitungan Mean Time Between Failure (MTBF), Mean Time To Repair (MTTR), dan availability, diikuti oleh analisis korelasi antara availability dan output produksi. Hasil penelitian menunjukkan bahwa terdapat korelasi yang sangat kuat antara availability dan output, dengan nilai korelasi sebesar 0,852. Pada Minggu ke-6 dan Minggu ke-11, terjadi downtime yang menyebabkan penurunan availability masing-masing menjadi 98,41% dan 97,96%, yang berdampak langsung pada penurunan output produksi. Berdasarkan hasil ini, direkomendasikan agar PT XYZ meningkatkan pemeliharaan preventif dan meminimalkan downtime untuk menjaga availability mesin pada tingkat optimal guna memaksimalkan hasil produksi

Unduhan

Data unduhan belum tersedia.

Referensi

T. V. Lawrencia, "Pengukuran Efektivitas Mesin dengan Metode Overall Equipment Effectiveness pada Mesin Stamping," Jurnal Serambi Engineering, vol. 8, no. 3, 2023.

N. I. B. Nordin, "Effect Analysis of Reliability Availability Maintainability and Safety (RAMS) of Train Operation.," Universiti Tun Hussein Onn Malaysia, 2015.

K. M. J. M. D. &. A. D. Antosz, "Systems Engineering: Availability and Reliability," Applied Sciences, 2022.

L. &. H. G. Hassani, "The Impact of Overall Equipment Effectiveness on Production Losses in Moghan Cable & Wire Manufacturing," International Journal for Quality Research, vol. 9, pp. 565-576, 2015.

M. R. M. &. I. Z. Rizwan, "Downtime Management in Industrial Production: A Case Study," International Journal of Mechanical Engineering, vol. 17, no. 3, pp. 45-56, 2019.

K. Sabekti, "Analisis Pengaruh Kuat Arus Listrik Terhadap Ketebalan Pelapisan Perak pada Aluminium A6063 dengan Proses Electroplating," Jurnal Rekayasa Teknologi, vol. 1, no. 2, pp. 45-55, 2020.

D. H. R. A. &. T. C. F. M. Triwardani, "Analisis Overall Equipment Effectiveness (OEE) dalam Meminimalisasi Six Big Losses pada Mesin Produksi Dual Filters DD07," Jurnal Rekayasa Dan Manajemen Sistem Industri, vol. 1, no. 2, 2013.

R. &. R. P. Yogesh, "Impact of Machine Availability on Product Quality in Aerospace Manufacturing," Journal of Engineering Studies, vol. 10, no. 1, pp. 33-42, 2018.

P. &. K. P. Lakshmi, "Production Losses Due to Machine Availability and Quality Issues in Manufacturing," Journal of Industrial Engineering and Management, vol. 12, no. 4, p. 451"“467, 2021.

R. I. E. &. A. Z. Handoko, "IoT-Based Monitoring System for Machine Availability and Maintenance in Aerospace Industry," Journal of Applied Engineering, vol. 23, no. 3, pp. 58-70, 2017.

Y. P. C. &. L. S. Kim, "Real-Time Condition Monitoring with IoT Sensors in Production Machines," Journal of Smart Manufacturing, vol. 30, no. 2, pp. 101-112, 2020.

S. I. M. &. R. H. Chandra, "Impact of Maintenance Strategies on Machine Availability and Production in Manufacturing," Journal of Maintenance Engineering, vol. 8, no. 1, pp. 14-25, 2019.

M. F. M. &. S. D. Zainudin, "Statistical Methods for Predicting Machine Downtime," Journal of Manufacturing Systems, vol. 45, no. 2, pp. 55-65, 2017.

W. &. F. A. Sutrisno, "Korelasi Nilai Availability Mesin dan Output Produksi di Industri Manufaktur," Jurnal Teknik Mesin, vol. 12, no. 3, pp. 78-88, 2020.

R. G. P. &. K. S. Sharma, "Correlation Analysis Between MTBF, MTTR and Production Efficiency," International Journal of Advanced Engineering Studies, vol. 7, no. 4, pp. 120-132, 2016.

P. &. L. M. Jonsson, "Evaluating the Impact of Machine Availability on Production through Overall Equipment Effectiveness," International Journal of Production Economics, pp. 12-23, 2017.

D. &. H. L. Smith, "Reducing Six Big Losses by Improving Machine Availability in Manufacturing," Journal of Industrial Engineering, vol. 25, no. 4, pp. 334-347, 2018.

J. &. L. X. Brown, "Improving Production Efficiency through Enhanced MTBF in Manufacturing Systems," International Journal of Production Research, vol. 57, no. 8, 2019.

A. S. D. &. L. G. Rahman, "MTBF as a Key Metric for Maintenance Optimization in Manufacturing Plants," Journal of Engineering Maintenance, vol. 39, no. 6, pp. 312-322, 2020.

R. &. P. K. Walker, "Reducing MTTR and Improving Operational Efficiency in Manufacturing," Journal of Manufacturing Systems, vol. 35, no. 3, pp. 205-217, 2017.

A. W. R. &. P. K. Goldstein, "Condition-Based Maintenance and its Impact on Reducing MTTR in Heavy Industries," Journal of Maintenance Engineering, vol. 29, no. 4, pp. 201-214, 2018.

J. &. J. S. Thompson, "Machine Availability and Its Influence on Production Efficiency: A Case Study.," International Journal of Production Research, vol. 58, no. 10, pp. 1845-1857, 2019.

L. &. L. T. Jackson, "Correlation between Machine Availability and Production Output in Manufacturing," International Journal of Manufacturing Technology and Management, vol. 33, no. 3, pp. 178-192, 2018.

P. &. R. C. Davidson, "Analyzing the Correlation between Machine Availability and Output in Industrial Settings.," Journal of Manufacturing Science and Engineering, vol. 142, no. 5, pp. 1109-1120, 2020.

P. &. L. M. Jonsson, "Evaluating the Impact of Machine Availability on Production through Overall Equipment Effectiveness," International Journal of Production Economics, vol. 192, pp. 12-23, 2017.

G. &. C. Y. Tian, "The Effects of Machine Availability on Production Efficiency in High-Intensity Manufacturing.," Journal of Manufacturing Systems, vol. 47, pp. 23-34, 2018.

X. &. L. K. Shao, "Correlating MTBF, MTTR, and Machine Availability with Production Output: A Study in Manufacturing Systems.," Journal of Operations Research, vol. 67, no. 3, pp. 345-358., 2019.

T. T. B. &. J. D. Miller, "Machine Availability and Its Impact on Human Resource Management in Industrial Systems," Journal of Operations Management, vol. 45, no. 2, pp. 102-115, 2020.