STUDI KUALITAS PENGELASAN MATERIAL A694/F65 OVERLAY INCONEL 625 MENGGUNAKAN METODE KOMBINASI GTAW DAN SMAW

Authors

  • Ebeng Sugondo Program Studi Teknologi Rekayasa Metalurgi, Politeknik Negeri Batam
  • Adi Syahputra Purba Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Kms M Avrieldi Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Ismiyatun Nurjannah Politeknik negeri batam

DOI:

https://doi.org/10.30871/jatra.v7i2.10531

Keywords:

GTAW, SMAW, Testing, Welding

Abstract

Welding is a method of connecting metal that involves melting a portion of the parent and filler metals until they are liquid enough to fuse. Nowadays, welding is becoming more and more common, particularly in the oil and gas sector. Combining GTAW with SMAW techniques is one of them. Because it can create robust and corrosion-resistant joints, the oil and gas industry frequently uses the combination of GTAW and SMAW welding techniques. The welding procedure on ASTM A694/F65 material covered with Inconel 625 will be covered in this study. While Inconel 625 is resistant to corrosion and stress cracking, A694/F65 steel will offer toughness for applications with low temperature field circumstances. The benefits of the various welding techniques are strategically integrated by this combination of welding procedures. While SMAW delivers great mechanical strength and filling efficiency for the fill to cap weld portions, GTAW will offer superior penetration and surface cleanliness on the root weld. The results of the tests, which included visual inspection, Magnetic Particle Inspection (MPI), and Ultrasonic Testing (UT), demonstrated that no evidence of serious flaws exceeding the acceptance criteria of the cited standards AWS D1.1:2025 for MPI and ASME Section VIII Div. 1 Appendix 12 for UT was discovered. It is anticipated that the study will serve as a guide for the welding procedure on gas and oil pipes.

Downloads

Download data is not yet available.

References

[1] L. E. Bilak.,Chamim, M. A. N Tri. And W.H Lilih. “Analisis Pengaruh Arus Pada Pengelasan Bertingkat (Multilayer Welding) Terhadap Struktur Mikro, Kekerasan Dan Kuat Tarik”. Vol :14, Issue :1 pages 205-212. DOI : 10.21776/jrm.v14i1.1210. 2023.

[2] A. Amir, dan S. Tommy. “Peningkatan Kualitas Sambungan Las Baja Karbon Rendah Dengan Metode Taguchi”.Vol III, Issue 2, Page:59-63.2017

[3] Y. R. Fauzi dan A. E. Heka. “Pengaruh heat input pada pengelasan combine GTAW- SMAW dissimillar material baja AISI 1045 dengan SS 304 terhadap sifat mekanik”. Vol :10, Issue : 2, Pages : 47-52.2024.

[4] A. S. Ismy, dan R. Nanda. “Pengaruh arus pengelasan SMAW terhadap kekuatan sambungan las double lap joint pada material AISI 1050,” vol. 2, no. 1, pp. 1–7, 2020.

[5] U. Sukamto, dan C Umam. “Pengaruh Variasi Kuat Arus Pengelasan Terhadap Berat Deposit Las Per Milimeter Pada Pengelasan Test Ring Astm A694 Gr F65 Dan Pipa Dnvgl Smls 450 Sfpdu Mod Menggunakan Proses Pengelasan Smaw Di Pt. Mcdermott Indonesia-Batam”. Vol. 3, No. 2, February 2023, pp. 159-169 P-ISSN: 2723-6854, E-ISSN: 2798-1037. 2023.

[6] Herizal, Hasrin, and Hanif, “Analisa Pengaruh Proses GTAW Dan SMAW Terhadap Ketangguhan Sambungan Pengelasan Material AISI 1050,” J. Weld. Technol., vol. 2, no. 1, pp. 19–25, 2020.

[7] F. Candra, S. Sugiyarto,“Analisis Penyambungan Las Gtaw (Gas Tungsten Arc Welding)/Tig Menggunakan Mesin Las Smaw (Shielded Metal Arc Welding)Seminar. Nasional.2022.

[8] Desmon , Semuel ; Analisa Pengaruh Variasi Arus Pengelasan Kombinasi Smaw Dan Gtaw Terhadap Pengujian Kekerasan , Kekuatan Impak Serta Pengamatan Struktur Mikro Pada Baj,” vol. 8, no. 1, pp. 24–33, 2022.

[9] Y. Indriati And N. 02511640000085, “Tugas Akhir − Tl 184834 Review: Evolusi Struktur Mikro Dan Fase Inconel 625 Pada Oksidasi Temperatur Tinggi,” 2020.

[10] ASME BPVC 2023 SEC IX,” Secret Doctrin., pp. 91–97, 2023.

[11] S.Sirohi, S.M. Pandey, A. Swierczynska, G. Rogalski, M. Landowski, D. Fydrych, and C. Pandey. “Microstructure and Mechanical Properties of Combined GTAW and SMAWDissimilar Welded Joints between Inconel 718 and 304L Austenitic Stainless Steel”. 13, 14.

[12] E. T. Ş. Çelik1, B. E. Çelik, Ş. Talaş. “Weldability of Dissimilar 316L and A106 Steels with GTAW and SMAW Using 309L and Inconel 82 Electrodes”. Volume 13, Issue 4, Page 41-48, https://doi.org/10.46810/tdfd.1496947.2024.

[13] Y. Yang, Y. Yang, L. Li, C. C dan Z. Min. “Automatic Defect Identification Method for Magnetic Particle Inspection of Bearing Rings Based on Visual Characteristics and High-Level Features”. Appl. Sci. 2022, 12, 1293. https://doi.org/10.3390/app12031293.2022.

[14] A. A. Supriyanto dan Syafrizal. “Penentuan Cacat Dengan Metode Ultrasonic Testing”. Jurnal RAMATEKNO, Vol. 2 No. 1, April 2022, hal. 7 – 13 ISSN 2828-2108. 2022.

[15] A. American and N. Standard, Structural Welding Code — Structural Welding Code — Steel. 2020.

[16] ASME, “ASME BPVC Section VIII División 1,” pp. 651–652, 2020.

[17] A. Fikrie1, W. D. Pratiwi, A. A. Fakhri. “Overlay welding analysis on GTAW and SMAW processes in terms of mechanical properties and corrosion rate”. Journal of Engineering and Applied Technology Online ISSN 2716-2265 Vol. 3, No. 2, August 2022, pp. 87-93 Printed ISSN 2716-2257.2022.

Downloads

Published

2025-12-30

How to Cite

Sugondo, E., Purba, A. S., Kms M Avrieldi, & Ismiyatun Nurjannah. (2025). STUDI KUALITAS PENGELASAN MATERIAL A694/F65 OVERLAY INCONEL 625 MENGGUNAKAN METODE KOMBINASI GTAW DAN SMAW. Jurnal Teknologi Dan Riset Terapan (JATRA), 7(2), 16–21. https://doi.org/10.30871/jatra.v7i2.10531

Issue

Vol. 7 No. 2 (2025): Jurnal Teknologi dan Riset Terapan (JATRA) - December 2025

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Most read articles by the same author(s)