ANALISIS UKURAN ANTROPOMETRI PELINDUNG WAJAH COVID-19 HASIL MANUFAKTUR MESIN 3D PRINTING

Authors

  • Zulfadli Program Studi Mekatronika, Politeknik Aceh
  • Mahmud Program Studi Teknologi Mesin, Politeknik Negeri Lhokseumawe
  • Muhammad Dirhamsyah Program Studi Teknik Mesin, Universitas Syiah Kuala
  • Samsul Bahri Program Studi Teknik Mesin, Universitas Syiah Kuala
  • Azwar Program Studi Teknologi Mesin, Politeknik Negeri Lhokseumawe
  • Sariyusda Program Studi Teknologi Mesin, Politeknik Negeri Lhokseumawe

DOI:

https://doi.org/10.30871/jatra.v7i2.9201

Keywords:

Face Protective Equipment, Anthropometrics, COVID-19, Manufacturing, 3D Printing

Abstract

The COVID-19 pandemic has not only resulted in significant loss of life but has also caused a critical shortage of Personal Protective Equipment (PPE) for healthcare workers. In response, the global community has leveraged 3D Printing technology to produce face shields. This study aims to analyze and evaluate the conformity of the dimensions of 3D-printed face shields with the head anthropometric measurements of the Indonesian population. Anthropometric data from three head segments (Head Length/D1, Head Breadth/D2, and Face Height/D3) were collected from 377 subjects. Three face shield models (PW1: low grade, PW2: medium grade, PW3: high grade) were manufactured using a 3D Printing machine. The analysis results indicate that the existing designs are not fully compatible with the percentile dimensions of the Indonesian population. Modifications to the frame and visor dimensions are required to better align with Indonesian anthropometric data. Additionally, adjustments in 3D Printing process parameters and improved product quality are essential to achieve a more ergonomic design.

Downloads

Download data is not yet available.

References

[1] S. Rassanjani, H. Helmi, and M. L. Lingga, “Melihat kebijakan penanganan COVID-19 yang populer di kalangan masyarakat Aceh,” J. Soc. Policy, vol. 2, pp. 27–33, 2022.

[2] N. H. Aliya, N. T. Rahmawati, J. Hastuti, and S. A. Febriana, “The facial measurements in health workers at Dr. Sardjito General Hospital, Yogyakarta,” J. Med. Sci. (Berkala Ilmu Kedokteran), vol. 55, no. 2, pp. 142–150, 2023, doi: https://doi.org/10.19106/JMedSci005502202306.

[3] K. K. R. Indonesia, “Buku Standar Alat Pelindung Diri dalam Manajemen Penanganan COVID-19,” 2020.

[4] S. Wignjosoebroto, “Teknik Analisis untuk Peningkatan Produktivitas Kerja dalam Ergonomi Studi Gerakan dan Waktu,” Inst. Teknol. Sepuluh Nopember, Surabaya, pp. 97–110, 2000.

[5] A. Hussein, F. Sadika, and D. Yunidar, “Pengembangan sistem penyetelan ukuran kepala pada helm las,” e-Proceeding Art Des., vol. 5, no. 3, p. 3792, Dec. 2018.

[6] W. Lee et al., “A 3D anthropometric sizing analysis system based on North American CAESAR 3D scan data for design of head wearable products,” Comput. Ind. Eng., vol. 117, pp. 121–130, 2018.

[7] F. S. Pratama, I. Muslim, and M. I. Zul, “Digitalization of human head anthropometry measurement using pixels measurement method,” Int. J. Innov. Technol. Explor. Eng., vol. 2, no. 3, pp. 63–70, Sep. 2018.

[8] S. Slamet, A. Sokhibi, S. Harmoko, H. Hariyanto, and S. Suyitno, “Kajian aspek ergonomi face shield untuk COVID-19,” J. Mech. Des. Test., vol. 3, no. 2, pp. 93–102, 2021.

[9] C. B. Nugroho et al., “Desain dan pembuatan faceshield sebagai alat perlindungan diri penyebaran COVID-19,” J. Pengabdi. Kpd. Masy. Politek. Negeri Batam, vol. 2, no. 1, pp. 1–16, 2020.

[10] Siswomihardjo, W. Dari Hulu Ke Hilir Perjalanan Sebuah Alat Kesehatan. Gadjah Mada University Press, 2022.

[11] S. Suharman and H. W. Murti, “Kajian industri 4.0 untuk penerapannya di Indonesia,” J. Manaj. Ind. dan Logistik, vol. 3, no. 1, pp. 1–13, 2019.

[12] M. Razi, B. Bukhari, T. Turmizi, and M. Nasir, “Pembuatan wastafel portable semi-otomatis sebagai upaya pencegahan penyebaran COVID-19 untuk jamaah mesjid Al-Bayan Politeknik Negeri Lhokseumawe,” Pros. Semin. Nas. Politek. Negeri Lhokseumawe, vol. 4, no. 1, pp. 16–18, 2020.

[13] T. K. C. Tan, M. Hartono, and N. Kumar, “Anthropometry of Singaporean and Indonesian populations,” Int. J. Ind. Ergon., vol. 40, pp. 757–766, 2010.

[14] Y. Zulkarnain and R. Ridwan, “Analisis perancangan tempat pengolahan limbah masker medis dengan mengimplementasi antropometri dan ergonomic function deployment,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 254–262, 2022.

[15] M. Siska and H. Henedi, “Perancangan helm anak-anak yang ergonomis (studi kasus di TK An-Namiroh Pekanbaru),” in Seminar Nasional Teknologi Informasi, Komunikasi dan Industri, Fakultas Sains & Teknologi UIN Suska Riau, 2011, pp. 414–422.

Downloads

Published

2025-12-30

How to Cite

Zulfadli, Mahmud, Dirhamsyah, M., Samsul Bahri, Azwar, & Sariyusda. (2025). ANALISIS UKURAN ANTROPOMETRI PELINDUNG WAJAH COVID-19 HASIL MANUFAKTUR MESIN 3D PRINTING . Jurnal Teknologi Dan Riset Terapan (JATRA), 7(2), 9–15. https://doi.org/10.30871/jatra.v7i2.9201

Issue

Vol. 7 No. 2 (2025): Jurnal Teknologi dan Riset Terapan (JATRA) - December 2025

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.