Inspeksi Hasil Sambungan Pengelasan SMAW pada Pembuatan Frame Acid Skid dengan Metode Liquid Penetrant Testing

  • Parlin Jhony Haposan Siagian Jurusan Teknik Mesin, Politeknik Negeri Batam
  • Nurul Laili Arifin Jurusan Teknik Mesin, Politeknik Negeri Batam
  • Nurul Ulfah Jurusan Teknik Mesin, Politeknik Negeri Batam
  • Hanifah Widiastuti Jurusan Teknik Mesin, Politeknik Negeri Batam
Keywords: SMAW, Acid Skid, Liquid Penetrant, Carbon Steel, Frame

Abstract

In this era of globalisation, many industrial companies have been built, especially in the chemical field. Chemical industry companies need a tank to store chemicals production result with a framework design that is nice and strong and can be moved easily. The material used is the type of carbon steel (S275JR) using the SMAW welding process at 6G welding position with intermediate currents in 59 A-134A. The type of joint for the frame is butt-joint, fillet joint and lap joint. In order to guarantee the quality of the welding results, the material will be tested in Non-Destructive Testing with the Inspection method using liquid penetrant, the penetrant method is solvent removable with visible sensitivity at a light level intensity of 1000 lux. The welding results are determined based on acceptance criteria in AWS with ASME as a critical reference. If there no defects or discontinuities like liniear and rounded were found in section of pad eye and base frame, then all welding results will be accepted.

Downloads

Download data is not yet available.

References

Everett, K and Hughes, D.1981., “A Guide to Lboratory Design”, Butterworths, London

Indrayono, F. R., Rhohman, F., dan Musliminllham, M. “Pengaruh Variasi Arus Dan Bentuk Kampuh Pada Pengelasan Smaw Terhadap Kekuatan Sambungan Las Dengan Elektroda Type E6013”. Artikel Skripsi, 02(02), Universitas Nusantara Pgri Kediri (Issn:2599-3011). 2018.

Tito Endramawan, (2017). Analisa Hasil Pengelasan SMAW 3G Butt Joint Menggunakan Non Destructive Test Penetrant Testing (NDT-PT) Berdasarkan Standar ASME.

PT. CATUR TEKNIK MANDIRI BATAM, Welding Procedure Specification (WPS) , (2019).

ASME BPVC Section V for NDT PT Art, (2013), Identical with ASTM Spesification E165-09.

AWS D1.1, 2015, Tabel 6.1 “Visual Inspection Acceptence Criteria”.

ASME Section VIII Divisi 1 Mandatory Appendix 6.

Published
2022-06-30
How to Cite
Siagian, P., Arifin, N. L., Ulfah, N., & Widiastuti, H. (2022). Inspeksi Hasil Sambungan Pengelasan SMAW pada Pembuatan Frame Acid Skid dengan Metode Liquid Penetrant Testing. Jurnal Teknologi Dan Riset Terapan (JATRA), 4(1), 28-33. https://doi.org/10.30871/jurnal teknologi dan riset terapan (jatra).v4i1.4014