Pembuatan Coupling 3 𝟏⁄𝟐” Mod EU Di PT Elnusa Fabrikasi Konstruksi

  • Benny Haddli Irawan Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Yudy Pratama Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Budi Baharudin Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Rahman Hakim Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Hanifah Widiastuti Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Widodo Widodo Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Ihsan Saputra Program Studi Teknik Mesin, Politeknik Negeri Batam
  • Fedia Restu Program Studi Teknik Mesin, Politeknik Negeri Batam
Keywords: Coupling, Facing, Blanking ID, Grooving ID, Processes, CNC Turning, API Spec

Abstract

Coupling 3 1⁄2” Mod EU (Modified External Upset) is an API 5CT (American Petroleum Institute)

product specially made at customer's request, this product is a product that is rarely made at PT ELNUSA FABRIKASI KONSTRUKSI. In this API 5CT product, it is a Modified EU Coupling product which is designed to use an additional ring seal for extra protection on the oil-flowing pipe. To make a 3 1⁄2” Mod EU Coupling, use a CNC lathe by going through the Facing, Blanking ID, Threading ID and Grooving ID processes. The purpose of making this final project is to find out the process carried out and the use of the right method in the manufacture of 3 1⁄2” Mod EU Couplings at PT Elnusa Fabrication Construction, as a learning media or data retrieval, especially when making other Coupling products.

Downloads

Download data is not yet available.

References

Dean Foreman & Mark Green. (2021). American PetrolEUmInstitute Retrieved from Standard:https://em2wfyl35bo4rlfhuv66lezmjy- fe3tvbk6lcbjw-www-API- org.translate.goog/products-and- services/standards

Prastio, A., Satoto, S. W., & Abdurrahman, N. (2018). Pembuatan Purwarupa Poros Propeller Sebagai Alat Simulasi Penggerak Kapal. Journal Polibatam, 1-12.

Shaanxi World Iron & Steel Co. (2018, March 06). World Iron & Steel. Retrieved from http://id.worldironsteel.com/news/a-brief-introduction-of-API-5l-API-5b-API-5c-13079392.html#:~:text=API%20Spec%205CT%2C%20spesifikasi%20untuk,casing%20atau%20pipa%20untuk%20sumur.&text=P%2D110%20dalam%20kelompok%20ketiga%20adalah%20kelas%20tinggi%20kekua

Syahroni. (2015). Perancangan dan Pengembangan Mesin Bubut Kendali CNC TMC 320 dengan Menggunakan Kendali CNC Headman 1000 Td. Jurnal Teknologi dan Rekayasa Volume 20, 52-60.

Mujabirul, Khoir (2011). Pembuatan Spindle Utama Pada Mesin Bubut CNC. S1 thesis, UNY, 1-168.

Insert Catalog Cobra Carbide, (2021).<https://cobracarbide.com/wp-content/uploads/dae-uploads/Cobra-Catalog-Ver2-2.pdf>

Published
2022-06-30
How to Cite
Irawan, B., Pratama, Y., Baharudin, B., Hakim, R., Widiastuti, H., Widodo, W., Saputra, I., & Restu, F. (2022). Pembuatan Coupling 3 𝟏⁄𝟐” Mod EU Di PT Elnusa Fabrikasi Konstruksi. Jurnal Teknologi Dan Riset Terapan (JATRA), 4(1), 13-20. https://doi.org/10.30871/jurnal teknologi dan riset terapan (jatra).v4i1.3743