Perbandingan Performa OpenPLC dengan PLC Komersial
DOI:
https://doi.org/10.30871/jaee.v8i2.8710Kata Kunci:
Industrial, PLC, OpenPLC, Perbandingan PerformaAbstrak
PLC konvensional biasanya mahal dan kurang fleksibel. Produsen PLC umumnya mendesain PLC mereka sedemikian rupa sehingga hanya dapat diprogram oleh perangkat lunak yang dibuat oleh mereka sendiri. Hal ini membuat fasilitas pendidikan seperti perguruan tinggi kesulitan dalam melatih operator PLC. Salah satu cara alternatif untuk melatih operator PLC adalah dengan menggunakan perangkat OpenPLC. OpenPLC adalah perangkat PLC open source yang relatif murah dan dirancang untuk bekerja seperti PLC konvensional dari tinjauan hardware maupun software. Karya tulis ini akan membahas perbandingan kinerja antara PLC konvensional dengan sistem OpenPLC. Beberapa aspek kinerja utama yang akan dibahas dalam makalah ini meliputi ukuran memori, waktu scan, dan ekspresi logika. Tulisan ini juga akan membahas tentang beberapa fitur yang hanya tersedia di salah satu jenis PLC. Pada bagian akhir kelebihan dan kekurangan dari PLC dan OpenPLC akan dibahas beserta tujuan penggunaannya masing-masing
Unduhan
Referensi
M. Wang, "Application of PLC Technology in Electrical Engineering and Automation Control," 2021, hlm. 131"“135. doi: 10.1007/978-3-030-51556-0_20.
B. Ahmad, G. Goswami, dan M. F. Khan, "Implementation of Automatic Excitation Initiator Circuit using Microcontroller based PLC for Standalone Induction Generator," Water And Energy International, vol. 65, no. 9, hlm. 29"“36, 2022.
G. Mahalakshmi, S. Sangeetha, Maladhi, dan T. Bhavatharini, "Automation of industrial drives using PLC and SCADA," 2022, hlm. 040009. doi: 10.1063/5.0108098.
C.-C. Andrei, G. Tudor, M. Arhip-Calin, G. Fierascu, dan C. Urcan, "Raspberry Pi, an Alternative Low-Cost PLC," dalam 2020 International Symposium on Fundamentals of Electrical Engineering (ISFEE), IEEE, Nov 2020, hlm. 1"“6. doi: 10.1109/ISFEE51261.2020.9756175.
S. Fujita, K. Hata, A. Mochizuki, K. Sawada, S. Shin, dan S. Hosokawa, "OpenPLC based control system testbed for PLC whitelisting system," Artif Life Robot, vol. 26, no. 1, hlm. 149"“154, Feb 2021, doi: 10.1007/s10015-020-00635-1.
J. A. Fortoul-Diaz, L. A. Carrillo-Martinez, A. Centeno-Tellez, F. Cortes-Santacruz, I. Olmos-Pineda, dan R. R. Flores-Quintero, "A Smart actory Architecture Based on Industry 4.0 Technologies: Open-Source Software Implementation," IEEE Access, vol. 11, hlm. 101727"“101749, 2023, doi: 10.1109/ACCESS.2023.3316116.
P. F. S. de Melo dan E. P. Godoy, "Controller Interface for Industry 4.0 based on RAMI 4.0 and OPC UA," dalam 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT), IEEE, Jun 2019, hlm. 229"“234. doi: 10.1109/METROI4.2019.8792837.
H. Jack dan S. C. Rowe, "Teaching Industrial Control with Open-Source Software," dalam 2023 ASEE Annual Conference & Exposition, 2023.
P. O. dan Z. B., "Prototyping of control units for systems with industrial controllers," System technologies, vol. 2, no. 151, hlm. 50"“61, Apr 2024, doi: 10.34185/1562-9945-2-151-2024-05.
S. Stankovski, G. Ostojic, M. Saponjic, M. Stanojevic, dan M. Babic, "Using micro/mini PLC/PAC in the Edge Computing Architecture," dalam 2020 19th International Symposium INFOTEH-JAHORINA (INFOTEH), IEEE, Mar 2020, hlm. 1"“4. doi: 10.1109/INFOTEH48170.2020.9066309.
V. V Potekhin, A. P. Alekseev, E. V Kuklin, A. E. Misnik, dan D. Khitrova Ya, "Programming of open distributed industrial systems based on the international standard IEC 61499," Computing, Telecommunications and Control, vol. 17, no. 1, hlm. 10"“19, 2024.
A. Ghaleb, S. Zhioua, dan A. Almulhem, "On PLC network security," International Journal of Critical Infrastructure Protection, vol. 22, hlm. 62"“69, Sep 2018, doi: 10.1016/j.ijcip.2018.05.004.
K. Rajkumar, K. Thejaswini, dan P. Yuvashri, "Automation of Sustainable Industrial Machine using PLC," J Phys Conf Ser, vol. 1979, no. 1, hlm. 012049, Agu 2021, doi: 10.1088/1742-6596/1979/1/012049.
Md. A. Kabir, K. R. Fahim, T. Hasan, Md. A. Ali, dan Md. A. Hossain, "Automatic Transfer Switch Using Programmable Logic Controller," dalam 2021 International Conference on Science & Contemporary Technologies (ICSCT), IEEE, Agu 2021, hlm. 1"“6. doi: 10.1109/ICSCT53883.2021.9642528.
P. Maynard, K. McLaughlin, dan S. Sezer, "An Open Framework for Deploying Experimental SCADA Testbed Networks," 2018. doi: 10.14236/ewic/ICS2018.11.
R. EUSEBIO-GRANDE, M. N. IBARRA-BONILLA, J. AMARO-BALANZAR, dan F. SÃNCHEZ-TEXIS, "Graphical user interface for a PLC programming implemented in an ARM Cortex-M4 microcontroller.," Journal Industrial Engineering/Revista de Ingenier'ia Industrial, vol. 6, no. 16, 2022.
H. P. Guntaka, R. Kushalkar, N. Venkat, A. Chipkar, V. Easwaran, dan K. Moudgalya, "Modular Hardware, Open Source Software and Training Material for PLC Training," dalam 2022 10th International Conference on Control, Mechatronics and Automation (ICCMA), IEEE, Nov 2022, hlm. 237"“242. doi: 10.1109/ICCMA56665.2022.10011589.
N. Zubair, A. Ayub, H. Yoo, dan I. Ahmed, "PEM: Remote forensic acquisition of PLC memory in industrial control systems," Forensic Science International: Digital Investigation, vol. 40, hlm. 301336, Apr 2022, doi: 10.1016/j.fsidi.2022.301336.
T. Alves dan T. Morris, "OpenPLC: An IEC 61,131"“3 compliant open source industrial controller for cyber security research," Comput Secur, vol. 78, hlm. 364"“379, Sep 2018, doi: 10.1016/j.cose.2018.07.007.
T. Alves, T. Morris, dan S.-M. Yoo, "Securing SCADA Applications Using OpenPLC With End-To-End Encryption," dalam Proceedings of the 3rd Annual Industrial Control System Security Workshop, New York, NY, USA: ACM, Des 2017, hlm. 1"“6. doi: 10.1145/3174776.3174777.
S. Niauronis, "OPENPLC HARDWARE SPEED PERFORMANCE COMPARISON," PROFESSIONAL STUDIES: Theory And Practice, vol. 27, no. 1, hlm. 65"“71, 2023.
J. Hajda, R. Jakuszewski, dan S. Ogonowski, "Security Challenges in Industry 4.0 PLC Systems," Applied Sciences, vol. 11, no. 21, hlm. 9785, Okt 2021, doi: 10.3390/app11219785
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Open Access Policy
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself.
