Comparison of Fuzzy Mamdani and Fuzzy Tsukamoto Methods on Automatic Spray Fan

Authors

  • Simon Petrus Silalahi Mechatronics Engineering Study Program, Electrical Engineering Department, Politeknik Negeri Batam, Batam, Indonesia
  • Agnes I Nababan Mechatronics Engineering Study Program, Electrical Engineering Department, Politeknik Negeri Batam, Batam, Indonesia
  • Daniel Sutopo Pamungkas Mechatronics Engineering Study Program, Electrical Engineering Department, Politeknik Negeri Batam, Batam, Indonesia
  • Adlian Jefiza Mechatronics Engineering Study Program, Electrical Engineering Department, Politeknik Negeri Batam, Batam, Indonesia

DOI:

https://doi.org/10.30871/jaee.v10i1.12925

Keywords:

Arduino UNO, Automatic Spray Fan, Fuzzy Mamdani, Fuzzy Tsukamoto, Sensor

Abstract

This study evaluates the implementation of Fuzzy Mamdani and Fuzzy Tsukamoto inference methods in an automated spray fan system designed to mitigate thermal discomfort in tropical climates. Utilizing an Arduino UNO integrated with DHT11 and PIR sensors, the system regulates fan speed and a water pump based on ambient temperature and human presence. Experimental results from 22 data points (25,8°C to 33,3°C) indicate that the Mamdani method exhibits higher sensitivity, initiating fan speed increases at 26,1°C and spray activation at 29,5°C. In contrast, the Tsukamoto method provides a more stable and gradual response, with fan transitions occurring at 28,4°C and spray activation at 30,5°C. While Mamdani is suitable for rapid cooling requirements, Tsukamoto demonstrates superior operational stability and energy efficiency through monotonic output functions. Manual calculations for both methods showed 100% consistency with experimental hardware outputs.

Downloads

Download data is not yet available.

References

[1] A. M. Ulum, “Pemanasan Global: Penyebab, Dampak, dan Upaya Penanggulangannya,” Jetrin J. Res. Trends Educ., vol. 1, no. 1, pp. 1–7, 2024.

[2] A. L. Ruriah, U. F. S. S. Pane, and E. Affandi, “Kipas Angin Otomatis Pada Ruang Tunggu Bengkel Mobil Menggunakan Teknik Counter Berbasis Arduino,” J. Sist. Komput. Triguna Dharma (JURSIK TGD), vol. 2, no. 2, pp. 70–78, 2023, doi: 10.53513/jursik.v2i2.6392.

[3] D. Faridawati, Q. Arrosyidah, F. Oktaviyati, V. D. Cahyani, L. N. Afni, and A. Harijanto, “Pengembangan Sistem Kipas Otomatis Berbasis Internet of Things (IoT) menggunakan Sensor PIR dan DHT11,” Jurnal Ilmiah Wahana Pendidikan, vol. 9, no. 15, 2023, doi: 10.5281/zenodo.8263192.

[4] R. D. Saputra, “Prototype Sistem Pengaturan Kecepatan Kipas DC Otomatis Menggunakan Sensor PIR, Sensor Ultrasonik, Sensor DHT11 Berbasis Mikrokontroler Arduino Uno dan NodeMCU,” Electrician: Jurnal Rekayasa dan Teknologi Elektro, vol. 16, no. 1, pp. 45–55, 2022.

[5] R. Rosmiati, N. Nirsal, and A. Renaldi, “Prototype Kipas Angin Otomatis Menggunakan Sensor Suhu Dht22, Ultrasonik Hc-Sr04, Dan Bluetooth Hc-05 Berbasis Mikrokontroler,” D’computare J. Ilm. Teknol. Inf. dan Ilmu Komput., vol. 11, no. 2, pp. 50–56, 2021, doi: 10.30605/dcomputare.v11i2.20.

[6] U. Athiyah, A. P. Handayani, M. Y. Aldean, N. P. Putra, and R. Ramadhani, “Sistem Inferensi Fuzzy: Pengertian, Penerapan, dan Manfaatnya,” J. Dinda Data Sci. Inf. Technol. Data Anal., vol. 1, no. 2, p. 2, 2021, doi: 10.20895/dinda.v1i2.201.

[7] X. Gu, J. Han, Q. Shen, and P. P. Angelov, “Autonomous Learning for Fuzzy Systems: A Review,” Artificial Intelligence Review, vol. 56, pp. 7549–7595, 2023, doi: 10.1007/s10462-022-10355-6.

[8] S. Sunardi, A. Yudhana, and F. Furizal, “Optimasi Pengendalian Suhu dan Kelembapan Ruangan di Kota Yogyakarta Menggunakan Metode Fuzzy,” JURIKOM (Jurnal Ris. Komputer), vol. 9, no. 6, p. 1749, 2022, doi: 10.30865/jurikom.v9i6.5060.

[9] Cahya dsn, “Fuzzy Inference System Mamdani.” Accessed: Apr. 17, 2024. [Online]. Available: https://extra.cahyadsn.com/mamdani?access=20240126052600

[10] I. Ahmad, A. Anantama, A. Wantoro, A. S. Puspaningrum, L. P. Deviana, and M. B. Maharani, “Implementasi Metode Fuzzy Pada Sistem Sirkulasi Udara Berbasis Internet of Things,” J. Tek. dan Sist. Komput., vol. 9, no. 2, pp. 2&3, 2021.

[11] H. S. Rustanto, “International Journal of Enterprise Modelling Enhancing Scholarship Recipient Selection: A Fuzzy Logic-Based Decision Support System Utilizing the Tsukamoto Method,” Int. Enterp. Model., vol. 18, no. 2, pp. 82–85, 2024, [Online]. Available: www.ieia.ristek.or.id

[12] D. Wicaksono, B. Santoso, and S. Kacung, “Impelentasi Metode Fuzzy Tsukamoto Pada Sistem Pendukung Keputusan Menentukan Kapasitas Air Conditioner,” J. Inform. Teknol. dan Sains, vol. 7, no. 2, pp. 759–767, 2025, doi: 10.51401/jinteks.v7i2.5732.

[13] R. Ruuhwan, R. Rizal, and R. Kurniawan, “Pendeteksi Gerakan Menggunakan Sensor PIR untuk Sistem Keamanan di Ruang Kamar Berbasis SMS,” J. Inform. Univ. Pamulang, vol. 5, no. 3, p. 281, 2020, doi: 10.32493/informatika.v5i3.5706.

[14] S. T. Aprilyani, I. Irianto, and E. Sunarno, “Desain dan Komparasi Kontrol Kecepatan Motor DC,” J. Ecotipe (Electronic, Control. Telecommun. Information, Power Eng., vol. 7, no. 2, pp. 127–129, 2020, doi: 10.33019/jurnalecotipe.v7i2.1886.

[15] R. Rahayu, Ratna, Ramdani, R. D. Artanto, and D. Lustiar, “Rancang Bangun Alat Pemadam Kebakaran Otomatis Berbasis Nodemcu Esp8266 Dan Menggunakan Bot Telegram Sebagai Notifikasi Kebakaran,” Teknol. Inform. Komput., vol. 1, no. 1, pp. 48–55, 2023.

Downloads

Published

2026-06-29

How to Cite

Silalahi, S. P., Nababan, A. I., Pamungkas, D. S., & Jefiza, A. (2026). Comparison of Fuzzy Mamdani and Fuzzy Tsukamoto Methods on Automatic Spray Fan. Journal of Applied Electrical Engineering, 10(1), 56–61. https://doi.org/10.30871/jaee.v10i1.12925

Issue

Vol. 10 No. 1 (2026): JAEE, June 2026

Section

Manuscripts

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself.

Most read articles by the same author(s)

Similar Articles

1 2 3 4 5 6 > >> 

You may also start an advanced similarity search for this article.