Perbandingan Performa OpenPLC dengan PLC Komersial

  • Enas Dhuhri Kusuma Universitas Gadjah Mada, Yogyakarta, Indonesia
  • Nifwan Arbi Nugroho Universitas Gadjah Mada, Yogyakarta, Indonesia
  • Addin Suwastono Universitas Gadjah Mada, Yogyakarta, Indonesia
  • Sujoko Sumaryono Universitas Gadjah Mada, Yogyakarta, Indonesia
DOI: https://doi.org/10.30871/jaee.v8i2.8710
Keywords: PLC, OpenPLC, Industrial, Performance comparison

Abstract

Conventional PLCs are usually expensive and less flexible. PLC manufacturers generally design their PLCs that they can only be programmed by software they have distributed themselves. This makes it difficult for educational facilities such as universities to train PLC operators. One alternative way to train PLC operators is to use the OpenPLC device. OpenPLC is a relatively inexpensive open source PLC device that is designed to work like a conventional PLC in terms of both hardware and software. This paper will discuss the performance comparison between a conventional PLC and the OpenPLC system. Several points that will be described in this paper include memory size, scan time, and logic expressions. This paper will also discuss several features available in one of the PLC variants. At the end of the section, the advantages and disadvantages of PLC and OpenPLC will be discussed along with their utilizations.

Downloads

Download data is not yet available.

References

M. Wang, “Application of PLC Technology in Electrical Engineering and Automation Control,” 2021, hlm. 131–135. doi: 10.1007/978-3-030-51556-0_20.

B. Ahmad, G. Goswami, dan M. F. Khan, “Implementation of Automatic Excitation Initiator Circuit using Microcontroller based PLC for Standalone Induction Generator,” Water And Energy International, vol. 65, no. 9, hlm. 29–36, 2022.

G. Mahalakshmi, S. Sangeetha, Maladhi, dan T. Bhavatharini, “Automation of industrial drives using PLC and SCADA,” 2022, hlm. 040009. doi: 10.1063/5.0108098.

C.-C. Andrei, G. Tudor, M. Arhip-Calin, G. Fierascu, dan C. Urcan, “Raspberry Pi, an Alternative Low-Cost PLC,” dalam 2020 International Symposium on Fundamentals of Electrical Engineering (ISFEE), IEEE, Nov 2020, hlm. 1–6. doi: 10.1109/ISFEE51261.2020.9756175.

S. Fujita, K. Hata, A. Mochizuki, K. Sawada, S. Shin, dan S. Hosokawa, “OpenPLC based control system testbed for PLC whitelisting system,” Artif Life Robot, vol. 26, no. 1, hlm. 149–154, Feb 2021, doi: 10.1007/s10015-020-00635-1.

J. A. Fortoul-Diaz, L. A. Carrillo-Martinez, A. Centeno-Tellez, F. Cortes-Santacruz, I. Olmos-Pineda, dan R. R. Flores-Quintero, “A Smart actory Architecture Based on Industry 4.0 Technologies: Open-Source Software Implementation,” IEEE Access, vol. 11, hlm. 101727–101749, 2023, doi: 10.1109/ACCESS.2023.3316116.

P. F. S. de Melo dan E. P. Godoy, “Controller Interface for Industry 4.0 based on RAMI 4.0 and OPC UA,” dalam 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT), IEEE, Jun 2019, hlm. 229–234. doi: 10.1109/METROI4.2019.8792837.

H. Jack dan S. C. Rowe, “Teaching Industrial Control with Open-Source Software,” dalam 2023 ASEE Annual Conference & Exposition, 2023.

P. O. dan Z. B., “Prototyping of control units for systems with industrial controllers,” System technologies, vol. 2, no. 151, hlm. 50–61, Apr 2024, doi: 10.34185/1562-9945-2-151-2024-05.

S. Stankovski, G. Ostojic, M. Saponjic, M. Stanojevic, dan M. Babic, “Using micro/mini PLC/PAC in the Edge Computing Architecture,” dalam 2020 19th International Symposium INFOTEH-JAHORINA (INFOTEH), IEEE, Mar 2020, hlm. 1–4. doi: 10.1109/INFOTEH48170.2020.9066309.

V. V Potekhin, A. P. Alekseev, E. V Kuklin, A. E. Misnik, dan D. Khitrova Ya, “Programming of open distributed industrial systems based on the international standard IEC 61499,” Computing, Telecommunications and Control, vol. 17, no. 1, hlm. 10–19, 2024.

A. Ghaleb, S. Zhioua, dan A. Almulhem, “On PLC network security,” International Journal of Critical Infrastructure Protection, vol. 22, hlm. 62–69, Sep 2018, doi: 10.1016/j.ijcip.2018.05.004.

K. Rajkumar, K. Thejaswini, dan P. Yuvashri, “Automation of Sustainable Industrial Machine using PLC,” J Phys Conf Ser, vol. 1979, no. 1, hlm. 012049, Agu 2021, doi: 10.1088/1742-6596/1979/1/012049.

Md. A. Kabir, K. R. Fahim, T. Hasan, Md. A. Ali, dan Md. A. Hossain, “Automatic Transfer Switch Using Programmable Logic Controller,” dalam 2021 International Conference on Science & Contemporary Technologies (ICSCT), IEEE, Agu 2021, hlm. 1–6. doi: 10.1109/ICSCT53883.2021.9642528.

P. Maynard, K. McLaughlin, dan S. Sezer, “An Open Framework for Deploying Experimental SCADA Testbed Networks,” 2018. doi: 10.14236/ewic/ICS2018.11.

R. EUSEBIO-GRANDE, M. N. IBARRA-BONILLA, J. AMARO-BALANZAR, dan F. SÁNCHEZ-TEXIS, “Graphical user interface for a PLC programming implemented in an ARM Cortex-M4 microcontroller.,” Journal Industrial Engineering/Revista de Ingenier’ia Industrial, vol. 6, no. 16, 2022.

H. P. Guntaka, R. Kushalkar, N. Venkat, A. Chipkar, V. Easwaran, dan K. Moudgalya, “Modular Hardware, Open Source Software and Training Material for PLC Training,” dalam 2022 10th International Conference on Control, Mechatronics and Automation (ICCMA), IEEE, Nov 2022, hlm. 237–242. doi: 10.1109/ICCMA56665.2022.10011589.

N. Zubair, A. Ayub, H. Yoo, dan I. Ahmed, “PEM: Remote forensic acquisition of PLC memory in industrial control systems,” Forensic Science International: Digital Investigation, vol. 40, hlm. 301336, Apr 2022, doi: 10.1016/j.fsidi.2022.301336.

T. Alves dan T. Morris, “OpenPLC: An IEC 61,131–3 compliant open source industrial controller for cyber security research,” Comput Secur, vol. 78, hlm. 364–379, Sep 2018, doi: 10.1016/j.cose.2018.07.007.

T. Alves, T. Morris, dan S.-M. Yoo, “Securing SCADA Applications Using OpenPLC With End-To-End Encryption,” dalam Proceedings of the 3rd Annual Industrial Control System Security Workshop, New York, NY, USA: ACM, Des 2017, hlm. 1–6. doi: 10.1145/3174776.3174777.

S. Niauronis, “OPENPLC HARDWARE SPEED PERFORMANCE COMPARISON,” PROFESSIONAL STUDIES: Theory And Practice, vol. 27, no. 1, hlm. 65–71, 2023.

J. Hajda, R. Jakuszewski, dan S. Ogonowski, “Security Challenges in Industry 4.0 PLC Systems,” Applied Sciences, vol. 11, no. 21, hlm. 9785, Okt 2021, doi: 10.3390/app11219785

Published
2024-12-30
How to Cite
Kusuma, E., Nugroho, N., Suwastono, A., & Sumaryono, S. (2024). Perbandingan Performa OpenPLC dengan PLC Komersial. Journal of Applied Electrical Engineering, 8(2), 125-131. https://doi.org/10.30871/jaee.v8i2.8710
Issue
Vol 8 No 2 (2024): JAEE, December 2024
Section
Manuscripts

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) ) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

Its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself.