Potensi Novelty Bidang Injection Mold Design: Visualisasi Pemetaan Bibliometric
Abstract
This study aims to determine the direction of development in the world of Mold & Dies design in the world. Data searches were carried out through science direct databases using the design of molds and dies as keywords with a limitation of open access journals between 2015 - 2020. The results were comprehensively analyzed based on year, publisher's name, institution, and the country as well as research subjects. Files from Mendeley software are saved in Reference Manager Format (.RIS) format which is processed into VOSviewer software to find out the bibliometric map. The results revealed that the highest number of publications is in a procedia manufacturing journal. The most contributing country in the European continent indexed in Scopus is Germany. Within the output in the form of network visualization, it is found that several novelty potentials are in line with the direction of the development of the study with the parameters of the number of population and the year of the research output. Publications on the most similarity and chance of novelty on research topics are in Cluster 1, which consists of Energy Efficiency, Decision Process, Plastic Materials, and Sustainability.
Keywords: Novelty, Injection Mold Design, Bibliometric Maping, VOSviewer
Downloads
References
H. Yanto, I. Saputra, and S. W. Satoto, “Analisa Pengaruh Temperatur dan Tekanan Injeksi Moulding Terhadap Cacat Produk,” J. Integr., vol. 10, no. 1, pp. 1–6, 2018.
B. H. Irawan, R. Hakim, H. Widiastuti, D. Kamsyah, and B. Sahputra, “Pengaruh Temperatur Nozzle Dan Base Plate Pada Mesin Leapfrog Creatr 3D Printer Terhadap Density Dan Surface,” J. Teknol. dan Ris. Terap., vol. 1, no. 1, pp. 32–37, 2019.
H. Widiastuti, S. E. Surbakti, F. Restu, M. H. Albana, and Ihsan, “Identifikasi Cacat Produk Dan Kerusakan Mold Pada Proses,” J. Teknol. dan Ris. Terap., vol. 1, no. 2, pp. 76–80, 2019.
A. S. B. Siallagan, F. Restu, and R. Hakim, “Experimental Study : Surface Roughness Analysis on Insert Molds with Grinding Wheel Types Variant,” in Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering-, 2018, vol. 5, no. 1, pp. 9–11.
R. Hakim, “Desain Cetakan Plastik Multi Cavity Dengan Sistem Intercangeable Mold Insert,” J. Simetris, vol. 11, no. 1, pp. 23–30, 2020.
I. Wijayanti, R. Hakim, and Widodo, “Studi Experimen Mula: Analisa Kekasaran Permukaan Baja ST 37 Terhadap Variasi Kuat Arus Listrik,” J. Teknol. dan Ris. Terap., vol. 1, no. 2, pp. 61–65, 2019.
I. Hamidah, Sriyono, and M. N. Hudha, “A Bibliometric Analysis of Covid-19 Research using VOSviewer,” Indones. J. Sci. Technol., vol. 5, no. 2, pp. 209–216, 2020.
T. Tupan, “Pemetaan Bibliometrik Dengan Vosviewer Terhadap Perkembangan Hasil Penelitian Bidang Pertanian Di Indonesia,” Visi Pustaka, vol. 18, no. 3, pp. 217–230, 2016.
N. J. van Eck and L. Waltman, “Software survey: VOSviewer, a computer program for bibliometric mapping,” Scientometrics, vol. 84, no. 2, pp. 523–538, 2010.
Elsevier, “Science Direct Webpage,” 2020. [Online]. Available: https://www.sciencedirect.com/. [Accessed: 04-Jun-2020].
Elsevier, “Procedia Manufacturing,” 2020. [Online]. Available: https://www.journals.elsevier.com/procedia-manufacturing. [Accessed: 08-Jun-2020].
Elsevier, “Procedia CIRP,” 2020. .
Elsevier, “Procedia Engineering,” 2020. [Online]. Available: https://www.journals.elsevier.com/procedia-engineering. [Accessed: 08-Jun-2020].
“Journal Elsevier: Procedia Structural Integrity,” 2020. [Online]. Available: https://www.journals.elsevier.com/procedia-structural-integrity. [Accessed: 08-Jun-2020].
Elsevier, “Sustainable Materials and Technologies,” 2020. [Online]. Available: https://www.journals.elsevier.com/sustainable-materials-and-technologies. [Accessed: 08-Jun-2020].
Elsevier, “Materials and Design,” 2020. [Online]. Available: https://www.journals.elsevier.com/Materials-and-Design. [Accessed: 08-Jun-2020].
Elsevier, “Journal of Computational Design and Engineering,” 2020. [Online]. Available: https://www.journals.elsevier.com/journal-of-computational-design-and-engineering.
Elsevier, “Energy Procedia,” 2020. [Online]. Available: https://www.journals.elsevier.com/energy-procedia. [Accessed: 08-Jun-2020].
Elsevier, “Applied Thermal Engineering,” 2020. [Online]. Available: https://www.journals.elsevier.com/Applied-Thermal-Engineering. [Accessed: 08-Jun-2020].
M. Lakkanna, G. C. Mohan Kumar, and R. Kadoli, “Computational design of mould sprue for injection moulding thermoplastics,” J. Comput. Des. Eng., vol. 3, no. 1, pp. 37–52, 2016.
M. Huszar, F. Belblidia, H. M. Davies, C. Arnold, D. Bould, and J. Sienz, “Sustainable injection moulding: The impact of materials selection and gate location on part warpage and injection pressure,” Sustain. Mater. Technol., vol. 5, pp. 1–8, 2015.
M. Moayyedian and A. Mamedov, “Multi-objective optimization of injection molding process for determination of feasible moldability index,” Procedia CIRP, vol. 84, pp. 769–773, 2019.
P. Heisler, S. D. Gick, and J. Franke, “The way to a simple and environment-friendly production design of complex foam parts - Innovative solutions for the polyurethane manufacturing industry,” Procedia Manuf., vol. 17, pp. 579–586, 2018.
U. Gotze, P. Pecas, and F. Richter, “Design for eco-efficiency – a system of indicators and their application to the case of moulds for injection moulding,” Procedia Manuf., vol. 33, pp. 304–311, 2019.
D. Tabakajew and W. Homberg, “Increasing the efficiency of hot mandrel bending of pipe elbows,” Procedia Eng., vol. 207, pp. 2310–2315, 2017.
H. Dunkelberg, T. Wei, and F. Mazurek, “Energy- And ecologically-oriented selection of plastic materials,” Procedia Manuf., vol. 33, pp. 240–247, 2019.
C. Cajal, J. Santolaria, R. Acero, and M. Pueo, “Introducing Design for Verification,” Procedia Eng., vol. 132, pp. 772–779, 2015.
W. Zhu et al., “Engineering Design and Manufacturing Education through Research Experience for High School Teachers,” Procedia Manuf., vol. 26, pp. 1340–1348, 2018.
M. Moayyedian, K. Abhary, and R. Marian, “New Design Feature of Mold in Injection Molding For Scrap Reduction,” Procedia Manuf., vol. 2, no. February, pp. 241–245, 2015.
H. Zhang, F. Fang, M. D. Gilchrist, and N. Zhang, “Precision replication of micro features using micro injection moulding: Process simulation and validation,” Mater. Des., vol. 177, p. 107829, 2019.
N. Ko, R. Graf, T. Buchert, M. Kim, and D. Wehner, “Resource Optimized Product Design - Assessment of a Product’s Life Cycle Resource Efficiency by Combining LCA and PLM in the Product Development,” Procedia CIRP, vol. 57, pp. 669–673, 2016.
C. Reise and L. Phan, “Sustainable Manufacturing in Vietnamese Engineering Education - Approaches from the Vietnamese-German University,” Procedia CIRP, vol. 40, pp. 341–346, 2016.
M. R. Alam, M. A. Amin, and M. A. Karim, “A Computer-aided Mold Design for Transfer Molding Process in Semiconductor Packaging Industry,” Procedia Manuf., vol. 21, no. 2017, pp. 733–740, 2018.
T. Wu, S. A. Jahan, Y. Zhang, J. Zhang, H. Elmounayri, and A. Tovar, “Design Optimization of Plastic Injection Tooling for Additive Manufacturing,” Procedia Manuf., vol. 10, pp. 923–934, 2017.
F. Fiorentini, P. Curcio, E. Armentani, C. Rosso, and P. Baldissera, “Study of two alternative cooling systems of a mold insert used in die casting process of light alloy components,” Procedia Struct. Integr., vol. 24, pp. 569–582, 2019.
J. Wang, S. R. Sama, P. C. Lynch, and G. Manogharan, “Design and topology optimization of 3D-printed wax patterns for rapid investment casting,” Procedia Manuf., vol. 34, pp. 683–694, 2019.
M. Lušić, K. Schneider, and R. Hornfeck, “A Case Study on the Capability of Rapid Tooling Thermoplastic Laminating Moulds for Manufacturing of CFRP Components in Autoclaves,” Procedia CIRP, vol. 50, pp. 390–395, 2016.
T. Yizong, Z. M. Ariff, and A. M. Khalil, “Influence of Processing Parameters on Injection Molded Polystyrene Using Taguchi Method as Design of Experiment,” Procedia Eng., vol. 184, pp. 350–359, 2017.
S. A. Jahan, T. Wu, Y. Zhang, J. Zhang, A. Tovar, and H. Elmounayri, “Thermo-mechanical Design Optimization of Conformal Cooling Channels using Design of Experiments Approach,” Procedia Manuf., vol. 10, pp. 898–911, 2017.
P. Estrada, H. R. Siller, E. Vázquez, C. A. Rodríguez, O. Martínez-Romero, and R. Corona, “Micro-injection Moulding of Polymer Locking Ligation Systems,” Procedia CIRP, vol. 49, pp. 1–7, 2016.
M. Moayyedian, K. Abhary, and R. Marian, “Improved Gate System for Scrap Reduction in Injection Molding Processes,” Procedia Manuf., vol. 2, no. February, pp. 246–250, 2015.
J. M. J. Becker and W. W. Wits, “Enabling lean design through computer aided synthesis: The injection moulding cooling case,” Procedia CIRP, vol. 37, pp. 260–264, 2015.
F. Fedorik and A. Haapala, “Impact of Air-gap Design to Hygro-thermal Properties and Mould Growth Risk between Concrete Foundation and CLT Frame,” Energy Procedia, vol. 132, pp. 117–122, 2017.
M. Babenko, J. Sweeney, P. Petkov, F. Lacan, S. Bigot, and B. Whiteside, “Evaluation of heat transfer at the cavity-polymer interface in microinjection moulding based on experimental and simulation study,” Appl. Therm. Eng., vol. 130, pp. 865–876, 2018.
C. Bellini and L. Sorrentino, “Mould design for manufacturing of isogrid structures in composite material,” Procedia Struct. Integr., vol. 9, pp. 172–178, 2018.
D. Tomasoni, S. Colosio, L. Giorleo, and E. Ceretti, “Design for Additive Manufacturing: Thermoforming Mold Optimization via Conformal Cooling Channel Technology,” Procedia Manuf., vol. 47, pp. 1117–1122, 2020.
C. Whlean and C. Sheahan, “Using additive manufacturing to produce injection moulds suitable for short series production,” Procedia Manuf., vol. 38, pp. 60–68, 2019.
I. Mircheski, A. Łukaszewicz, and R. Szczebiot, “Injection process design for manufacturing of bicycle plastic bottle holder using CAx tools,” Procedia Manuf., vol. 32, pp. 68–73, 2019.
C. Kriesi, O. Bjelland, and M. Steinert, “Fast and iterative prototyping for injection molding - A case study of rapidly prototyping,” Procedia Manuf., vol. 21, no. 2351, pp. 205–212, 2018.
V. Brøtan, O. Å. Berg, and K. Sørby, “Additive Manufacturing for Enhanced Performance of Molds,” Procedia CIRP, vol. 54, pp. 186–190, 2016.
L. Grandguillaume, S. Lavernhe, Y. Quinsat, and C. Tournier, “Mold manufacturing optimization: A global approach of milling and polishing processes,” Procedia CIRP, vol. 31, pp. 13–18, 2015.
D. Kwiatkowski, M. Modławski, and T. Jaruga, “Design of Flash Pocket Inserts in an Extrusion Blow Mould Based on the Results of Numerical Simulations,” Procedia Eng., vol. 177, pp. 127–134, 2017.
D. Oliveira, A. Mateus, P. Carreira, F. Simões, and C. Malça, “Water Assisted Injection Molding for Single and Multi-branched Tubular Components,” Procedia Manuf., vol. 12, no. December 2016, pp. 141–149, 2017.
C. Santos, A. Mateus, A. Mendes, and C. Malça, “Processing and Characterization of Thin Wall and Biodegradable Injected Pots,” Procedia Manuf., vol. 12, no. December 2016, pp. 96–105, 2017.
R. C. N. Barbosa, R. D. S. G. Campilho, and F. J. G. Silva, “Injection mold design for a plastic component with blowing agent,” Procedia Manuf., vol. 17, pp. 774–782, 2018.
P. Hernández et al., “Electroforming Applied to Manufacturing of Microcomponents,” Procedia Eng., vol. 132, pp. 655–662, 2015.
Z. Li, L. Liu, A. V. Barenji, and W. Wang, “Cloud-based Manufacturing Blockchain: Secure Knowledge Sharing for Injection Mould Redesign,” Procedia CIRP, vol. 72, pp. 961–966, 2018.
R. Tasaki, H. Seno, and K. Terashima, “Process design and control of greensand mold press casting using estimation of metal filling behavior,” Procedia Manuf., vol. 15, pp. 443–450, 2018.
H. S. Park and X. P. Dang, “Development of a Smart Plastic Injection Mold with Conformal Cooling Channels,” Procedia Manuf., vol. 10, pp. 48–59, 2017.
A. B. M. Azhar, M. S. Risby, A. S. M. Sohaimi, M. N. Hafizi, S. Khalis, and S. Asrul, “Conceptual mold design for multi-curved natural fiber reinforced composite body armor panel,” Procedia CIRP, vol. 37, pp. 95–100, 2015.
A. A. Dzulkipli and M. Azuddin, “Study of the Effects of Injection Molding Parameter on Weld Line Formation,” Procedia Eng., vol. 184, pp. 663–672, 2017.
