Optimizing Supply Chain Performance: A Performance Prism Analysis of Goods Receipt in Semiconductor Manufacturing
DOI:
https://doi.org/10.30871/jaba.8341Keywords:
Performance Measurement, Goods Receipt, Performance Prism, Multi-criteria Decision, Objective MatrixAbstract
This study analyzes the goods receipt process performance at a semiconductor manufacturing company facing issues with process failures and inaccurate goods handovers, resulting in significant losses. Also, the company has never applied a comprehensive and structured performance measurement method to the goods receipt process. Using Performance Prism and Analytical Hierarchy Process (AHP) methods, 23 Key Performance Indicators (KPIs) were identified from three stakeholder groups: internal customers, receiving staff, and suppliers, categorized into five Performance Prism perspectives. Data collected through interviews was analyzed using Objective Matrix (OMAX) and Traffic Light System (TLS). Results show the current goods receipt process performance is in the yellow category, with a value of 3.66 and a score of 6, indicating adequate but improvable performance. The semiconductor manufacturing company needs to focus on enhancing KPIs in the yellow and red categories to achieve optimal performance. Recommendations include conducting periodic evaluations and improving communication systems between stakeholders to address these performance issues and minimize losses.
Downloads
References
Afifah, Syakhroni, A., & Khoiriyah, N. (2022). Performance Measurement Analysis Of PT. Pijar Sukma Using Performance Prism, Analytical Hierarchy Process (AHP), And Objective Matrix (OMAX) Methods. JAST: Journal of Applied Science and Technology, 2(1). https://doi.org/http://dx.doi.org/10.30659/j ast.2.01.34-41
Amin, N. F., Garancang, S., & Abunawas, K. (2023). Konsep Umum Populasi dan Sampel dalam Penelitian. Jurnal Pilar: Jurnal Kajian Islam Kontemporer, 14. https://journal.unismuh.ac.id/index.php/pilar/article/view/10624
André Regis Oliveira, A., & Maria Guerra Bezerra Chaves, M. (2018). Process modeling and structuring: understanding the receiving stage in a logistics operator. https://doi.org/http://dx.doi.org/10.18265/1517- 03062015v1n4 1p11-23
Ayusita Wardhani, M. (2022). Pengukuran Kinerja PT Mangul Jaya dengan Metode Performance Prism. Scientifict Journal of Industrial Engineering, 3(1).
Cahyadi, U., & Aziz, R. A. (2022). Perancangan Key Performance Indicator untuk Mengukur Kinerja Menggunakan Metode Performance Prism. https://jurnal. itg.ac.id/
Carel, C., Tondang, B., & Kamal, M. (2024). Analysis Of Receiving Operations In Improving Quality Of Perishable Materials At Four Points By Sheraton Batam. TEHBMJ (Tourism Economics Hospitality and Business Management Journal), 3 (2). https://doi.org/10.36983/tehbmj.v3i2.520
de Oliveira, A. V., Pimentel, C. M. O., Godina, R., Matias, J. C. de O., & Garrido, S. M. P. (2022). Improvement of the Logistics Flows in the Receiving Process of a Warehouse. Logistics, 6(1). https://doi.org/10.3390/logistics6010022
Devano, A. M., Tarigan, Y., & Naibahoa, D. M. (2023). The Performance Measurement of Mobiya Material’s Supply Chain to Support Special Projects for the UNHCR. https://jurnal.polibatam.ac.id/index.php/JABA
Devano, A. M., Tarigan, Y., Priyono, M. A., & Daffa'ulhaq, M. N. (2023, December). Analysis of Supply Chain Management Performance Measurement: A Case Study in an Indonesian Manufacturing Company. In ICAESS 2023: Proceedings of the 5th International Conference on Applied Economics and Social Science, ICAESS 2023, 7 November 2023, Batam, Riau islands, Indonesia (p. 249). European Alliance for Innovation.
Farisy, S. Al, Jufriyanto, Moh., & Rizqi, A. W. (2023). Analisis Pengukuran Kinerja Departemen QC Inspector Menggunakan Metode Performance Prism dan AHP (Studi Kasus PT XYZ). Jurnal Optimasi Teknik Industri (JOTI), 5(1). https://doi.org/10.30998/joti.v5i1.16323
Hudori, M. (2016). Identifikasi dan Eliminasi Waste pada Proses Receiving di Gudang Logistik. In Malikussaleh Industrial Engineering Journal (Vol. 5, Issue 2).
Kulińska, E., & Giera, J. (2019). Identification and Analysis of Risk Factors in the Process of Receiving Goods into the Warehouse. Foundations of Management, 11(1), 103–118. https://doi.org/10.2478/fman-2019-0009
Kusuma, M., & Sulindawati, N. L. (2023). Analisis Pengukuran Kinerja Dengan Metode Performance Prism Pada Koperasi Kredit Swastiastu. VJRA, 12(1). https://doi.org/https://doi.org/10.23887/vjra.v12i01.56187
Legaretsa, A. B., & Purnamawaty, E. (2021). Pengukuran Kinerja Karyawan dan Supplier Pada PT. XYZ dengan Metode Performance Prism. Juminten : Jurnal Manajemen Industri Dan Teknologi, 02(04), 49–60. https://scholar. archive.org/work/cbxdlqfkdfg7pjk5um323zx7a4/access/wayback/http://juminten.upnjatim.ac.id/index.php/juminten/article/downlo ad/279/141
Novita, E., Marxoni, E., & Welly, W. (2021). Pengukuran Kinerja dengan Metode Performance Prism dan OMAX (Studi Kasus : PT. X). Inaque : Journal of Industrial and Quality Engineering, 9(1), 49–61. https://doi.org/10.34010/iq e.v9i1.4307
Palinoan, A., Mangngenre, S., & Pandjalangi, N. (2024). Analisis Kinerja Perusahaan Pt. X Dengan Metode Performance Prism. ARIKA, 18(01). https://doi.org/https://doi.org/10.30598/arika.2024.18.1.1
Rushton, A., Croucher, P., & Baker, P. (2014). Handbook of THE Distribution Management MAnAgEMEnt.
Singgih, Amelia Santoso, & Markus Hartono. (2019). Penelitian Analisis Pengukuran dan Perbaikan Warehouse Performance Pada Distribution Center di PT.X. Calyptra : Jurnal Ilmiah Mahasiswa Universitas Surabaya Vol.7 No.2 , 7. https://journal.ubaya.ac.id/index.php/jimusarticle/view/38 97
Subhan, M. R., Profita, A., & Widada, D. (2022). Perancangan dan Pengukuran Kinerja Rantai Pasok Industri Amplang (Studi Kasus: UD. Taufik Jaya Makmur, Samarinda). 10(1), 17–29. https://doi.org/https://doi.org/10.333 73/profis.v10i1.4322
Tarigan, Y., Devano, A. M., Harlan, F. B., Arzaman, A. F. M., Nadia, L., & Rashid, N. (2024). Supplier Selection Analysis for Sand Materials Using AHP in the Indonesian Manufacturing Industry. Journal Européen des Systèmes Automatisés, 57(3).
Warastuti, S., & Rahmaini. (2021). Pengaruh Strategi Bersaing Dan Manajemen Rantai Pasokan Terhadap Kinerja Perusahaan (Studi Pada Pt Packet Systems Indonesia). Jurnal Ilmiah Manajemen, 7(1), 43–56.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Shalini Simanjuntak, Alrido Martha Devano
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
